How to enter msi boot menu?

Boot menu is always related to computer booting process. The booting process is as follows: POST first detects the peripherals and devices to make sure the hardware is ready; next, the computer accesses the BIOS firmware and then assigns to boot from the boot device with the first priority; finally, read the assigned boot device to enter the operating system.

Sometimes, you need to open boot menu and change the boot order for the following two reasons:

Anyway, you need to access the MSI boot menu. To access MSI boot menu, here are two ways:

Through the above ways, you can boot into the operating system you want to enter.

In general, entering MSI BIOS or MSI boot menu is very simple. But some people report that they can't enter MSI BIOS or MSI boot menu. In this case, there are 3 ways for you to solve this problem.

This solution is provided by a MSI motherboard user. He said there is a problem with USB keyboards that the USB keyboards are not recognized by the computer until the OS starts to load. Therefore, the MSI boot menu key and MSI BIOS key are not working.

To solve this problem, you just need to switch the current USB keyboard to the old PS/2 keyboard. If you have a PS/2 keyboard, you can try this method. If you don't have such a keyboard, just try the following ways.

If you can boot into Windows, you can use this method. Please refer to the following steps:

How to Enter Lenovo Boot Menu & How to Boot Lenovo Computer

If your computer can't boot into Windows, you can use this method. Please refer to the following steps:

After performing the above methods, your keyboard can respond to your commands in computer booting process.

What Is Dell Boot Menu and How to Enter It on Windows 10

Answer. Press “F11” can display boot menu on the screen.

Please follow the troubleshooting methods below:

Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu

Go [settings] → [System status] to confirm if the boot device has been detected.

Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu

Click [Boot] → Select [Boot mode select]

Select boot mode that fits your need. For Windows 7 please select [LEGACY+UEFI], For Windows 8/10, please select [LEGACY+UEFI] & [UEFI] respectively to see if it can boot to Operating system.

Select [Boot Option#1]

Make sure the [Boot Option#1] is set as [UEFI HARD DISK] or [HARD DISK]

Select [UEFI Hard disk Driver BBS Priority] or [Hard disk driver BBS Priority]

Select [Boot Option#1]

Confirm [Boot Option#1] is set as the boot device

Upon powering on the PC, please start hitting the [F11] key continuously to enter the boot device selection. Choose a boot device to see if you can enter the operating system.

During the booting process, the PC will detect all of the peripherals, parts and devices. The USB devices might slow down the booting process or even affect the OS booting operation. Please remove all of the USB devices and power on the PC, see if it can enter the Windows environment.

Please test with another boot device with an installed Operating system, see if it can enter Windows environment.

If the other boot device can boot to Windows, it proves the original one is abnormal.

• Restart the computer.
• Press the F2 key to enter computer's BIOS Setup during Power-On Self-Test, or POST, process while the Acer logo is being displayed.
• Press the Right Arrow key to select Main.
• Select F12 Boot Menu.
• Press the Enter key.
• Select Enabled.
• Press the Enter key.