How to vacuum in ground pool?

Here’s our full in-depth guide to how to vacuum an inground or above ground pool quickly and effectively so you can get back to swimming.

If you’re looking for some more DIY pool maintenance video tutorials, invest in our Pool Care Video Course by Swim University®. We’ll show you the proper way to hook up your manual vacuum and vacuum your pool efficiently so you can spend more time swimming.

Before you get started, make sure the pool pump and filter are running. You also want to check that you’re running at a good starting pressure. If you have a D.E. or sand filter and the pressure is high, backwash it. If you have a cartridge filter, make sure the cartridges inside are cleaned and ready to go. Here’s our full guide on cleaning every type of filter.

IMPORTANT: If you’re dealing with algae or cloudy water, change your filter valve settings to the waste setting if you have a multiport valve or push/pull valve. This will bypass your filter and send the dirty water out through the waste port. If you have a cartridge filter, just remove the drain plug and attach a backwash hose. Your pool water level will drop while you vacuum. Use a garden hose to add fresh water while you’re vacuuming.

First, ensure the pump and filter are running. Attach the vacuum head to the open end of the telescopic pole. Attach one end of the hose to the vac head. If the hose is slippery, use a hose clamp to keep it in place.

Place the vac head, telescopic pole, and hose in the pool, making sure the vac head rests on the bottom of the pool. Place the other end of the vacuum hose against a return jet in the pool. This will push water through the hose and drive all the air out.

Triple-check to make sure the vacuum inlet is the only line open to the pump. If not, particles and debris will also be sucked in by the pump and undo all your hard work.

NOTE: You’ll see air bubbles rising from the vacuum head on the floor of the pool. Once the air bubbles stop, all the air is out of the hose.

Attach the skim vac plate to the end of the hose you’d previously placed against the return jet, block the opening with your hand, and bring it over to the skimmer. Insert it in the skimmer on top of the basket and be sure to create a good seal or suction will be lost.

If you’re not using a vacuum plate, remove the skimmer basket inside. Use your hand to block the end of the water-filled hose. Then place the hose into the skimmer inlet, making sure it’s firmly inserted into the suction hole at the bottom of the skimmer.

NOTE: Whichever method you choose will create the suction that pulls material through the vac head, up through the hose into the skimmer, and then through the filter system. If your vacuum loses suction, just follow the prep steps again to restore it.

Now that you’ve built a powerful siphon using your filter system, you can vacuum the floor of your pool. Start at the shallow end (if you have one) and move toward the deep end of the pool. If you have a round pool, just start at one side and move left or right across the floor.

Use long, slow, sweeping strokes to clean. Make sure your strokes overlap slightly to avoid leaving any debris behind. Rushing will just kick up debris, which will reduce visibility and take hours to settle down again.

If the water does become cloudy, give it a couple of hours to resettle, then come back and vacuum again, repeating as necessary.

If the vac head becomes stuck, switch off the pump for a second to break the vacuum force and set it free. Also, be sure to monitor your pool filter’s pressure gauge as you vacuum. If the pressure rises above the levels recommended by the manufacturer, take a break, and backwash your filter.

Once you’ve finished vacuuming your entire pool, it’s time to clean up and get back to swimming.

You don’t have to dread the vac head! When it’s time to vacuum your pool—whether you’re just the hands-on type or waging war on invading algae—you can get the job done by hand with a little preparation, a lot of elbow grease, and a healthy dollop of patience.

Looking for more help with your pool vacuum cleaner? Here are some common questions and answers.

If you’re just doing a light debris vacuum, you can keep it on the “Filter” setting. But if your pool is really dirty, it’s best to put the filter on the “Waste” setting (not “Backwash”) to bypass the filter when vacuuming. The filter is now powerful enough to remove debris that quickly.

If you’re vacuuming a lot of heavy debris out of your pool, your filter setting should be turned to “Waste.” Do not use the “Backwash” setting. The goal is the bypass the filter entirely which is what the “Waste” setting does. Backwashing reverses the flow of water through your filter to clean it out.

First of all, welcome to the club! While some people find this to be a form of meditation, it’s still a chore. And thankfully, we live in a world of blossoming technology I can help you task this to a swimming pool vacuum that acts like a robot.

Independent cleaners that vacuum your pool using electricity. You plug them in, drop them in your pool, and let them do all the hard work on their own. All you have to do is empty the built-in filter bag when they get full of debris. These are by far the best automatic pool cleaners on the market, but they can be a bit pricer. Hey, you get what you pay for.

We keep an updated list of our favorite robotic pool cleaners. But here’s one we highly recommend:

These cleaners hook up to your return line and use the water pressure from your filter system to power a self-contained automatic cleaner around the bottom of your pool to pick up debris into a filter bag.

We highly recommend investing in a Polaris Pool Cleaner. But here’s our favorite one:

This is just an automatic version of vacuuming your pool manually. They hook up the same way you do when you vacuum your pool manually. The biggest difference, however, is that they move around the bottom of your pool by themselves. That way, you don’t have to stand there in the hot sun and do it yourself.

However, we recommend if you’re going to make this investment, that you go for a pressure-side or robotic cleaner. That said, here’s our favorite suction-side automatic pool cleaner:

Happy Swimming!

Vacuuming your swimming pool is a great way to keep your pool clean and free of dirt and debris. Sure, it’s a little work, but the benefits of vacuuming are worth the effort: You’ll spend less time fighting algae, your pool water will stay balanced, and your chemicals will work more efficiently. Your pool will look nicer, too.

Ready to add vacuuming to your inground or above-ground pool maintenance routine? It’s easy. All you need is a few essential pieces of equipment and a good vacuuming technique.

Before you vacuum your pool, you should make sure that you have everything you need to get the job done. Here’s what you’ll need to get started:

Once you have all of your equipment ready, it’s time to get started. Follow the steps below to manually vacuum your above ground or inground swimming pool:

This is quick and easy to do. Simply attach the vacuum head to your telescoping pole (remember, it should snap on easily).

Attach one end of the hose to the vacuum head and attach the other end to your skimmer using the vacuum plate. (Remember to take the skimmer basket off first!).

For light vacuuming, you can leave your multiport valve filter set to “Filter.” For bigger jobs and larger amounts of debris, set your filter system to the “Waste” setting, which does sends the water down the drain, rather than through the filter.

Move the vacuum like you would a real vacuum on a rug, in slow linear passes (going too fast will just stir up the dirt without sucking it up). If the pool is especially dirty, you may have to stop and empty the pump strainer before continuing. Repeat the process as many times as you need to remove all debris from the floor of your pool.

Once your pool is vacuumed to your satisfaction, you can disconnect your vacuum head and hoses. Make sure to clear out the bottom of the skimmer, too. If you changed your filter pump settings, make sure to change them back (and if you’re using a sand or DE filter, now’s the time to do a quick backwash). For a finishing touch, attach a brush to your telescoping pole and give the pool floor and sides a good scrubbing.