Saravanan Krishnamoorthy

By D Sohinki · 2014 · Cited by 40 — Vagal maneuvers are an appropriate first treatment option in patients with hemodynamically stable SVT. Studies report an approximately 25% success rate,

Bremerhaven is the largest city on Germany's North Sea coast, located at the point where the River Weser flows into the North Sea. In Bremerhaven's Havenwelten

After class 10, students and parents have to make a key decision about the science stream. Which subjects to take in class 11 – PCM, PCB or PCMB? Medical or Non-Medical stream, which is better?

Quick answer : Take PCB if you want to study medicine after 12. Take PCM if you want to pursue engineering after 12. Take both (PCMB) if you are not sure what you want to study. If you like to do a course in basic science, then you can choose your preferred subjects accordingly.

Let’s know everything about PCM, PCB and PCMB streams so that you will not have any confusion when choosing subjects in class 11.

In science stream, you can take multiple combinations of subjects – PCM, PCB and PCMB.

PCM Full Form : Physics Chemistry Mathematics

PCB Full Form : Physics Chemistry Biology

PCMB Full Form : Physics Chemistry Mathematics Biology

PCM is a combination of subjects a student can take in class 11 and 12 which must include Physics, Chemistry and Mathematics.

List of subjects you can take in class 11 PCM : Physics, Chemistry, Math, English, Computer Science or any other optional subject.

Do you like Math as a subject? Are you comfortable solving Math problems? In your mind, is it clear that you want to pursue engineering? Is IIT your dream? If the answer is Yes to any of the these questions, then take Non-Medical i.e. PCM.

PCB is a combination of subjects a student can take in class 11 and 12 which must include Physics, Chemistry and Biology.

List of subjects you can take in class 11 PCM : Physics, Chemistry, Biology, English and any other optional subject.

If your dream is to become a doctor, then it’s a no-brainer that you need to take Medical stream (PCB). If you are clear that Math is not your cup of tea, you don’t have much desire to pursue engineering and you like studying Biology, in that case the medical stream is a good option for you.

PCMB is a combination of subjects a student can take in class 11 and 12 which include Physics, Chemistry, Mathematics and Biology.

Yes, if you are not sure whether you would like to pursue medicine, engineering or any other science course, then you can take both Math and Biology in class 11 (PCMB stream).

You can prepare for IIT JEE and NEET at the same time. It will be tough to study Math and Biology combined, but it’s doable and some students have cleared both the entrance examinations – JEE and NEET.

The main advantage of taking PCMB is that the students will have the option of choosing multiple career options  after class 12. You will be eligible to give NEET, JEE and other engineering entrance exams. It’s best for the confused students who don’t know what to take up as a career.

The disadvantage of taking PCMB is that sometimes it gets difficult to manage both Math and Biology. You might have to put in more effort compared to others.

Both PCM and PCB are good career options. Choosing PCM or PCB depends on the student’s interest whether he wants to pursue engineering or medical. Generally, PCM is recommended for engineering and PCB for medical aspirants.

What subjects/ group should I take in class 11 to become a doctor?

Take PCB in class 11 to become a doctor. Subjects to take in class 11 to become a doctor : Physics, Chemistry, Biology, English and any optional subject.

Which subjects to choose in 11th for software/computer/mechanical/civil engineering?

For engineering, it’s better to take the PCM stream. Subjects to choose in class 11 for engineering : Physics, Chemistry, Math, English and Computer Science.

PCM or PCB, which is hard and which is easy?

Neither PCM is hard nor PCB is easy. Math requires a lot of practice while Biology needs a lot of memorization and revision. Choose your stream as per your interest in the subject and field you want to continue in future.

The scope and opportunity is equally good in engineering and medical. Whatever subject you choose, give your best effort.

Best wishes for your career ahead!

Related posts :

NEET vs JEE – Which is Better?

Engineering or Medicine – Which Career to Choose

We’re listening to students. Have something to say about this article, or any question in mind? Share it with us on Facebook

The new MVNOs on the block · China Telecom Global partners with Tata Communications to bring its customers' IoT devices worldwide connectivity · Antel and

Best Neighborhoods in El Paso, TX · Castner Heights · Emory Road/West Sunset Road · Mission Hills · Mountain View · Park Foothills · Redd-Mulberry

Chicago, Illinois. Level Contributor. 2,571 posts. 20 reviews. 9 helpful votes. 1. Re: Best Bloody Mary?? 8 years ago. Save. most likely personal choice, ...1 answer · Top answer: most likely personal choice, but I do like Rockit,as they have a bloody mary bar (for the fixin's

Gorakhpur Deaths: Adityanath Government Ignored SOS on Oxygen Payments for Months. In the months leading up to the tragedy that took the lives of at least

Leave out the apostrophe when making last names plural For names that do not end in – s , –z, –ch, –sh, or –x, just add – s to the end

Visit your classroom in advance. Familiarize yourself with the layout of the desks and the front of the classroom. Have a back-up plan. Plan your lecture and visual aids beforehand. Prepare speaking notes. Include delivery reminders in your notes. Practice your lecture. Bring a bottle of water.

Kala ycfjmaid price on aaa batteries

Gurgaon, Haryana

Silly question? If you have a male and you don't know it, it will never flower, but will produce pollen sacs, whatever you do.

As soon as a male cannabis plant starts to show its gender, you can easily identify it.

The leaves and side branches emerge from the main stem in the picture. Females and males have small flowers. The pre-flowers show two small hair-like stigmas within a day or two, but it's difficult to tell when they're flowers. Until they look like little clusters of green grapes, the pollen sacs will continue to grow.

Wait a second.

I bought some seeds. The seeds are created using a method called feminization. The process of seeds developing into female plants is very reliable. If you get a male plant out of a packet of feminized seeds, you either hit the bad luck lottery and fell into that 0.1% category, or there was an error at the packaging stage, and the normal seeds got mixed up with the feminized Sometimes mistakes are made, so do yourself a favor and pay attention to the signs of sex no matter what you buy.

Do your plants have autoflowering genetics?

Do you try to get them to bloom in 24 hours? If so, try to set the light to be on for 18 hours and off for 6 hours. Old-school autos with a high percentage of ruderalis flower uncontrollably from the third week after germination, even when the lights are not on. The amount of ruderalis in current autoflowers has been decreased by breeders in response to the demand for stronger, higher-yielding automatics. It's simple.

If ruderalis genetics are increased, darkness needs to be decreased. The opposite occurs if it is reduced.

If you grow photoperiod plants in the same environment as your autoflowers, you don't have to worry about reducing the light. It won't hurt the plants and may do them good. If you don't see pistils forming after two weeks of lighting, your plants may be photoperiod, which is when the flowers start to bloom. Sometimes mistakes are made.

Unless they receive at least 12 continuous hours of darkness every 24 hours, photoperiod cannabis plants will not flower.

Professional growers take advantage of nature's rules to keep their best mothers in a state of vegetative state for a long time so that they can take their best buds. Most plants will start to form buds around 10 days after a 12/12 lighting cycle, and here's why.

When the lights are on, photoperiod cannabis plants produce red and red in equal amounts. When the lights are on, the red color of the plant is normal red.

When the red is greater than the far red, the plant will start to flower. Some growers turn off the lights and place their plants in total darkness for 36 hours before setting their timers.

The amount of time it takes for the flowers to form once switched to 12/12 depends on the variety, but the length of time left in the vegetative stage is also a determining factor. You can try to get the plants to flower.

You can put the seeds on a 12/12 cycle after they are grown. The younger the plant, the longer it will take for the buds to show.

If you grow your plants for about 6 weeks, long enough for them to reveal their gender, they will be eager to start when you lower the lighting and can put on pistils in a few days.

If you notice any changes after a week or two, you can try 11 or even 10 for a week. The longest day of the year is not much different from the shortest, and the flowering period can last up to 14 weeks, which is why pure sativas evolved near the equator. Sometimes sativas are willing to take a hint with a little more darkness than an Indica or hybrid mix would need.

Another dumb question, right?

It is dark. The lights are not on. Some strains are so sensitive that if you don't use a timer to make sure the lights go on and off at the same time every day, they won't be happy and won't start to flower.

Check for leaks if the timer is set correctly and functioning. Some strains can tolerate light leaks, but others can only tolerate a few stray rays. If you're using a new cabinet, check it out. Most of them have a light leak somewhere.

Seal every spot where you see the light shining through by inspecting the tent closely and using heavy tape. Don't forget the top and the zippers. Keeping the lights on in the room where the closet is located off can help, as can having the lights on during the day and off at night.

Are you lucky to have a grow room? The lights are off during the day.

Look for light coming in through the windows, around the door, and anywhere else you can think of. Finally, lock the door. During the dark cycle of your plants, some curious eyes might be looking at you.

If you want to be extremely safe, cover any electronics in the grow space. Digital timers, thermostats, thermometers, fans, or any other electrical appliance can be included.

If you're growing plants outdoors, you don't have to worry about the light being too dim. Mother Nature takes care of everything for you. She plants your seedlings in the spring and they will start to show signs of flowering in August and will be ready to harvest in the fall.

You can make your plants flower earlier than normal. The easiest way to grow flowers is auto flowers. It's not easy to set up a tarp or other cover that blocks out light for 12 hours a day. Growers with a limited budget will have to pay close attention to the clock in order to cap and uncover on time.

Those who can afford it can buy automated systems that do it for them.

If you live in an area with a warm climate, you should be aware of "revegging" because you can grow cannabis outdoors from late winter to early spring. Plants may start to flower, then stop and return to a state of being in a vegetative state as daylight hours increase. This can be achieved with indoor plants. After harvest, leave some foliage on your plants and turn on the lights.

You will see if you try it.