Ask Sawal

Discussion Forum
Notification Icon1
Write Answer Icon
Add Question Icon

Chelsie Barot




Posted Questions


No Question(s) posted yet!

Posted Answers



Answer


Media converters today are widely deployed in all sorts of industries and sectors to provide a connection between copper and fiber, including security surveillance, government defense, enterprise, campus LANs. The classic small footprint makes media converter a perfect fit to install for desktops, wire closets, and data centers. Although the application environment of media converter may vary, the cabling method is rather identical in essence. The following part illustrates two frequently-used cases of how to connect media converter.

As it is more of a commonplace to deploy a pair of fiber media converters in a network, a single media converter is sometimes needed to link copper cabling to a fiber device. In the figure below, a fiber media converter with 1×SFP slot and 1×RJ45 is applied, connecting the Ethernet switch (Switch B) of all RJ45 interfaces to an SFP switch (Switch A). The steps of connecting fiber optic cable and copper cable to media converter are as follows:

1. Connect the copper port of Switch B to the RJ45 port of fiber media converter using a UTP cable (Cat5 and above).

2. Plug an SFP transceiver into SFP slot on the media converter, and plug another SFP module into Switch A.

3. Insert a fiber patch cable into the SFP transceivers on the media converter and Switch A.

A pair of fiber media converters are often applied to link together two copper cabling systems for extending transmission distance. It is also the most common scenario using media converter in a network. The following steps show how to use a pair of media converters with network switches, transceivers, fiber and copper cables.

1. Connect the copper port of Switch A and RJ45 port of fiber media converter #1 using a UTP cable (Cat5 and above).

2. Plug an SFP module into SFP slot of fiber media converter #1, and plug another SFP module into SFP slot of fiber media converter #2.

3. Use a fiber patch cable to connect the fiber media converter #1 and fiber media converter #2.

4. Connect the RJ45 port of fiber media converter #2 to Switch B using a UTP cable.

Note: Optical transceivers are basically hot-pluggable devices, so there is no need to power off the media converter when inserting transceivers into the corresponding ports. Always remember to remove the fiber patch cable before removing the transceiver, and install the transceiver on the media converter before inserting the cable into the transceiver endface.

Media converters are simply plug and play devices, yet you still have to consider some factors when connecting them to the network. It is better to choose a flat, secure place to install the media converter. Leave ample space around the converter for ventilation.

Media Converters are designed for easy use in optical fiber transmission. When the connection does not work as expected after setting it up in a network, we need to do some troubleshooting. The checking include but not limited to the following six aspects:

1. The POWER LED on the media converter is off and the unit is not receiving power.

Solutions:

2. The SYS LED on the media converter is off.

Solutions:

3. The SYS LED on the media converter is blinking slowly.

Solutions:

4. Network performance between the twisted-pair port on the media converter and an end node is slow.

Solutions:

5. There is no communication with the devices connected to the media converter.

Solutions:

6. When the media converter is applied for the network, the whole link of the network can not communicate constantly.

Solutions:


Answer is posted for the following question.

How to connect ofc cable to switch?

Answer


Use nutrients such as fish oil, vitamin C, vitamin D, and probiotics to help calm your immune response naturally Exercise regularly it's a natural anti-


Answer is posted for the following question.

What helps cure autoimmune disease?

Answer


You should make your estimate as accurate as possible, based on the amount you've paid for the goods and any other costs you agreed to cover For example:


Answer is posted for the following question.

How to estimate import vat?

Answer


First, download the Tenda WiFi app on your mobile device by searching for Tenda WiFi in App Store or Google Play and download it. Next, go to the WiFi network list on your mobile device, select the SSID of the nova unit, and enter its password. The SSID and password are specified on the label of the nova unit.


Answer is posted for the following question.

How to set up tenda mw6?

Answer


  1. Step 1 Free download AutoCAD DXF Viewer tool from the company's website and launch the software after installation is complete
  2. Step 2 Go to Open option under the File Menu or use Ctrl +O Then Click on Browse option to search the DXF file
  3. Step 3 Use Zoom-In or Zoom-Out options to view DXF File

Answer is posted for the following question.

How to dxf viewer?

Answer


Most mobs and players in this game can be killed by falling damage. It doesn't affect mobs that can fly. Since players are not that powerful in all modes, we will focus on methods you can use to reduce fall damage in survival.

Let's get started.

The index is a measure of something.

We'll start with how to prevent fall damage inMinecraft.

Potion of Slow Falling can help you out of sticky situations. It doesn't deal with fall damage to you because it reduces the speed at which you fall. It gives you plenty of time to plan if there is a danger.

It's used to avoid falling into the lava of the Nether.

You need to brew an Awkward Potion to make Slow Falling. You will need to make a stand and many other items.

Potions in the game have a short duration, so you should be aware of that. One of the best enchantments in the game is a familiar solution.

If you apply the enchantment to your boots, you can reduce fall damage and save yourself. The rate of fall is not reduced by it.

It will not make you immune to fall damage, but it will reduce it by up to 48%.

There are other armor enchantments like blast protection. If you combine them, you can provide up to 80% drop damage protection.

This isn't a way to avoid falling damage, but rather to not fall at all. You can sneak around the edges by pressing and holding the shift key on the PC. If you are pushed by a crowd, water, or an explosion, sneaking is not effective.

If you slip off the edge, you can fly. When you fall from a high enough place, you can fly with an elytra.

It gives you more control to land away from the dangers below. It is only effective after you have collected the Elytra from the Final dimension.

You can't control how you fall or avoid falling. The only thing you have control over is where you land. There are blocks in the game that can reduce or eliminate fall damage.

The best option is sweet berry bushes, which will not cause any fall damage. Light damage to you is caused by moving through sweet berry bushes.

There are honey blocks and hay bales that can reduce the effect by 80%. You can land on beds, which reduces fall damage by 50%, but also causes players to bounce a bit.

The slime block is a popular block.

It makes you bounce a lot. If you land on top of it, you can avoid the fall. You will have to worry about avoiding the damage it causes. It's not easy to press the stealth key to avoid a ricochet.

This is the most popular way to avoid falling.

Most professional gaming players use buckets of water to prevent fall damage. It's definitely effective if you do it right. You must have a bucket of water with you when you fall.

Drop the water before you fall.

It takes practice before you can do it. You can try to land on water if you see water on the surface. Even if there is a single block of water, it will not affect fall damage.

You can use other blocks if you get the hang of using water.

The spider web is one of the most used options. The drop height will be reset if a web is placed before the fall.

You won't take any damage from falling on top of it.

Placing hay bales and other blocks won't completely remove fall damage. Water cubes are easier to craft. It can be a bit difficult to get out of the house.

Boats can be used to avoid fall damage in the game. To avoid fall damage, make a boat in the game. If you need to get down from a high place, a dinghy is useful.

Push the boat over the edge to go down. If you keep using the movement keys to row the boat, you won't get hurt.

If you don't row the boat as it falls, fatal fall damage can kill you.

Changing your landing location is a good way to avoid falling.

If you have Ender Pearls, you can use them to get to other places. You can use an er pearl to avoid fall damage. To use it, you need to throw an ender pearl towards the place you want to use it. When it lands, you will be taken to that location.

It can help you avoid fall damage, but it also does light damage. You will lose two hearts of health after using an Ender pearl. If you throw it towards a place with a certain height, it could cause fall damage there.


Answer is posted for the following question.

Hi Hmmm. Need help. How to disable item drops in minecraft?

Answer


Tap and hold on a photo that you want to move up or down it's current order and the screen will show a vertical strip as shown in the screenshot below. Without removing your finger from the screen, move it up or down and position it where it fits the order you have in mind.


Answer is posted for the following question.

How to arrange photos in fb post?

Answer


I was born in the late 1980s.I cannot do the same job for a week.I can't watch soaps for 30 minutes in a row.I can't wait for a red signal without cursing the traffic!I can't wait 15 minutes in a ration queue.I can't watch a cricket match after a player leaves.

For the last 23 years, I have been reading 'The Hindu'.Is it rated overrated?


Answer is posted for the following question.

Is The Hindu good?

Answer


Simply place the peaches in a brown paper bag, loosely roll the top closed, and leave at room temperature. The total time for ripening varies, and largely depends on just how firm the peaches are when starting, but it's safe to plan on a day or two. Check the peaches after about 24 hours .


Answer is posted for the following question.

How to ripen store bought peaches?

Answer


  • sys.availability_groups.
  • sys.availability_groups_cluster.
  • sys.dm_hadr_availability_group_states.

Answer is posted for the following question.

How to check ahg status?


Wait...