Casper Friend

Unlike previous versions of the game where the system only enforced a game starts limit, this year the system enforces a maximum number of acquisitions allowed per head-to-head matchup. An “acquisition” is defined as a player added from free agency (or waivers) to a team’s roster.

Also know, what does acquisition mean in fantasy? Acquisitions limits apply to players added through free agency or waivers, while trade limits apply to trades between teams, and involve players and draft picks. These limits will be in effect for the whole season, including playoffs.

Additionally, how do I change my matchup acquisition?

Furthermore, what is acquisition limit? Acquisition Cost Limit means Authority limits on the maximum purchase price of a home, by area.

In this regard, what are matchups in fantasy basketball? Our NBA Matchup Ratings are metrics that indicate how good or bad each NBA Team’s offense or defense is at limiting fantasy production to their opponent matchup. Matchup opponents that rank in the top 7 surrender the most fantasy points. They represent easy matchups that fantasy owners should target.An “acquisition” is defined as a player added from free agency (or waivers) to a team’s roster. … Once the acquisitions limit is reach, a team will no longer be able to add players until the following matchup begins.

This format uses two full weeks for each of the playoff matchups, which can be a grind after a long season but also helps ensure that the better team wins by removing some of the randomness you may find in a one-week playoff game.

For example, suppose your waiver period is set for 1 day. This means the waiver will process at the next waiver processing that is at least a full 24 hours (1 day) later.

The League Manager (LM) has the option of modifying waiver settings and player signings allowed during the season. Players added via trade do not count against any team acquisition limits. NOTE: This setting cannot be changed after the league has drafted.

An option for ESPN Fantasy Hockey League Manager leagues is Free Agent Budget, or “FAB”. Free Agent Budget (FAB) – Teams have a specific budget that they can use for player signings. All offers are processed after the league’s specified waiver period.

Many leagues will have an acquisition limit per week or per season. This sets a cap on how many times a general manager may pick up a free agent and drop a roster player per week or season, respectively.

An “acquisition” is defined as a player added from free agency (or waivers) to a team’s roster. … Once the acquisitions limit is reach, a team will no longer be able to add players until the following matchup begins.

Fantasy basketball works on the same basic principles as any other fantasy sport: the game is based on constructing teams of players from the respective league and earning points based on their real-life performances. The points you earned determine winners and losers, whether it’s that day, that week, or that season.

Best Defense vs. Position (DvP) Matchups looks at each player and their matchup. From there, we rank how good the matchup is based on the average number of fantasy points the opposition gives up to players at that position; the higher the rank, the better the matchup.

1600 = 4:00 PM using regular (standard) 12-hour AM/PM notation.

What time is 1600 military time? 4:00 PM on the standard 12-hour clock. Pronounced “Sixteen Hundred”, It can be challenging to compare 1600 to 4:00 PM standard time. When the time climbs above 1200, you can’t just drop the zero like in 0700 (7:00 AM) or just add a colon in the middle of 1000 (10:00 AM).

So what is 1600 military time or “sixteen hundred hours?” To sort this out take the military time of 1600 and simply subtract 1200. Then add a colon between the hours and minutes, and attach a PM to the end. You know it is PM vs AM if the military time is equal to or greater than 1200. 1200 or greater is always PM except for 2400 which is AM (12:00 AM).

You can find a simple reference for 1600 below and additional information for each minute from 1600 – 1659 military time through an easy-to-read chart.

TIP: If you need to convert military time and the time is at or after 1 PM or 1300 (military time), then all you need to do is subtract 1200, add a colon between the minutes and hours, and put at PM after it.

Step 1.  1600 – 1200 = 400

Step 2.  400 + Add a “: ” after the 4 = 4:00

Step 3.  4:00 + PM (add PM if the original number is higher than 1159 military time) = 4:00 PM

You can say: “Sixteen Hundred hours.”

Use the tool below to convert military time to standard time or, alternatively, converted standard time to military time quickly and easily!

Based on the 24-hour timekeeping system, military time differs slightly in that the colon is omitted and the leading zero (if needed) is always notated. Military time is notated in “hhmm” format where hh can be between 0-23 and mm can be between 00-59. Military time is utilized primarily in the United States by military, government, emergency services, and other industries where time precision and communication are critical.

User manual Vacuum Cleaner for Hoover FH51000

FEATURES

1. Handle Grip 2. Solution Trigger 3. Clean Boost™ Trigger 4. Clean Water/Solution Tank Release Button 5. Carry HandleSee other models: F7412900 FH40010B WH20200 BH57300PC BH05200 6. Clean Water/Solution Tank 7. Dirty Water Tank Release Latch 8. Dirty Water Tank 9. Accessory Hose Connection Port 10. Solution Tube Connection Port 11. Removable Nozzle 12. ON/OFF Pedal 13. Cord Clip 14. Cord Storage Hook 15. Handle Lock 16. Handle Release Pedal 17. Mesh Tool Storage Bag

CARTON CONTENTS

A. Carpet Cleaner Base B. Handle C. Clean Water/Solution Tank D. Upholstery Tool E. Carpet Cleaning Detergent F. Hose

Remove all parts from carton and identify each item shown.

Make sure all parts are located before disposing of packing materials.

Base and Lower Handle As

2.1 Stand base in upright position. Push handle onto base.

2.2 Turn dial counter clockwise to “LOCK” postion. Dial should stop when locked and handle should feel secure.

2.3 Place clean water tank securely on handle above dirty water tank until it snaps into place.

CORD STORAGE

Wrap cord around cord hooks for convenient storage. Attach the plug end to cord.

Before you begin cleaning

Remove and replace clean water solu- tion tank

3.1 Press Clean Water Solution Tank button on handle (A). Tilt Clean Water Solution Tank away from cleaner and remove (B).

3.2 Rotate measuring cap counter-clockwise from the top of Clean Water Solution Tank and pull up to remove.

3.3 Fill Clean Water Solution Tank with hot tap water to fill line.

3.4 Fill measuring cap with cleaning solution 3 times, (approximately 3 oz.). Pour into clean water solution tank and replace measuring cap.

3.5 Place clean water solution tank back on handle until it snaps in.

NOTE: Using more than the recommended amount of cleaning solution may cause excessive foaming.

Carpet Cleaning

3.6 Plug cord into electrical outlet. Step on handle release pedal, to put unit in cleaning position.

3.7 Step on power switch to turn machine ON (I=ON).

3.8 Squeeze trigger (C) to apply cleaning solution and slowly push cleaner forward (equals one wet stroke). Continue to squeeze trigger and slowly pull cleaner back toward you (second wet stroke).

3.9 Release trigger and slowly push cleaner forward over area just sprayed with solution (dry stroke). Then slowly pull cleaner back toward you without squeezing trigger (dry stroke). Continue using dry strokes until little water is visible passing through the nozzle (Pass over the same area a minimum of 4 times = 2 while squeezing the trigger and 2 without).

For spots and high traffic areas use CLEAN BOOST™. To use CLEAN BOOST™ to remove those tough stains, apply extra cleaning solution by squeezing the trigger as you normally would and also pressing the Clean Boost™ trigger at the same time.

NOTE: For best results, use straight, parallel strokes. Overlap strokes by 1 inch to help prevent streaking.

Keep nozzle flat on floor for both forward and reverse strokes.

For best cleaning results and to aid in faster drying of carpet, end with more dry strokes. (Continue using dry strokes until little water is visible passing through the nozzle.)

NOTE: Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”)

For best cleaning results, Hoover recommends to rinse the carpet with water only. This will remove residual carpet cleaning solution from your carpets. To rinse with water only, fill Solution Tank with water and repeat step 3.9.

For heavily soiled areas, repeat cleaning process. Avoid saturating carpet.

NOTE: It is best to alternate wet and dry strokes as described above.

Wrap cord around hooks for convenient storage. Attach the plug end to the cord.

Dirty Water Tank

How to Empty

3.10 Grasp dirty water tank handle and push latch to release. Pull tank out at a slight angle.

3.11 To empty dirty water tank, pull up on the 2 latches to open and remove top of tank to empty.

3.12 Replace tank lid with both latches locked after cleaning. Latches will snap when they are locked. Failure to do so will result in poor suction performance.

3.13 Insert dirty water tank back into the cleaner until it snaps into place.

NOTE: Do not open latches before removing tank from machine.

CONNECT HOSE FOR TOOL USE

How to Attach

4.1 Open Accessory Hose Suction Port located at the bottom of the recovery tank (A).Insert hose end and Accessory Hose Solution connector by inserting firmly into Hose Solution Port.

How to Remove

4.2 Press button on end of hose and pull to remove hose and solution connection from machine.

4.3 Close Accessory Hose Suction Port door back into place. Make sure to close door to ensure proper suction. Unit may lose suction if not closed properly.

TOOLS (*Available on select models only.)

A. Upholstery Tool has a built-in brush to help provide the scrubbing action some spots may need for removal.

NOTE: Tools located and stored in Mesh Storage Bag.

How to Attach Tools

4.4 To ensure maximum performance and to protect your carpet, be sure to place the handle in the upright position while using the accessory hose. Placing handle in the upright position shuts off the brushes. NOTE: All tools attach to the hose in the same manner:

4.5 Connect tool to hose by sliding it onto connector until the tab locks it securely (B). Using your thumb, push forward and up on the latch to remove tool (C).

After Using Tool

4.6 Drain suction hose by turning cleaner ON and holding nozzle up for several minutes. Do not press trigger.

Cleaning upholstery

Read “Before You Begin Cleaning” instructions.

Be sure to check Hoover Cleaning Guide on page 6 and the cleaning code on your upholstery. Use your cleaner only on upholstery marked “W” or “W/S”.

Simply fill your clean water tank with water only and repeat steps 7 and 8.

If additional cleaning is necessary, wait until the upholstery is completely dry before using the tool again.

Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic Shut-Off”).

When finished cleaning, follow “After Cleaning” and “After Using Tool” instructions.

Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness.

Any other servicing should be done by an authorized service representative.

If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use

Cleaning the dirty water tank

Note: During normal use of cleaning, debris may accumulate inside of dirty water tank. In order to keep your unit functioning properly and to prevent any odors from building up, it is best to rinse out your dirty water tank with fresh water after each use.

5.1 Remove dirty water tank from unit by pressing on latch and pulling the tank out at an angle.

5.2 Pull up on latches to open dirty water tank. Remove top and rinse tank with clean water.

5.3 To clean dirty water tank ducting, place dirty water tank under faucet and dispense high pressure clean water into the inlet port of the dirty water tank to loose debris that has accumulated. Be sure to clean the filter screen that is located in the duct of the recovery tank base.

5.4 Allow tank to air dry completely. Pull up on latches then back down to lock. Latches will snap when locked. Replace dirty water tank back onto unit until it snaps.

Lubrication

REMOVING AND CLEANING NOZZL

Nozzle: How to Clean

If lint or other debris becomes lodged in nozzle, it can be removed for cleaning.

5.6 To prevent possible leaking, remove Clean Water Tank and Dirty Water Tank with handle in upright position, tilt carpet washer back.

5.7 Pull up on nozzle latch slightly to unsnap nozzle from foot of carpet washer.

5.8 Pull nozzle forward to remove from carpet washer.

5.9 Rinse debris from nozzle.

5.10 Position nozzle on to foot, making sure to align the tabs at the bottom of the nozzle with the notches on the foot. Snap nozzle to foot.

STORAGE

Before storing:

Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet cleaner on a carpeted or wood surface.

Belt or Brushroll: How to Remove and Replace

How to Remove

5.11 Flip cleaner on its back to expose bottom of cleaner. NOTE: Belt cover is 4 pieces and has 15 screws.

5.12 To remove first piece of belt cover, remove 3 screws. Arrows show location of screws. NOTE: Screw locations are numbered on belt covers.

5.13 Remove belt guard.

5.14 To remove second piece of belt cover, remove the 3 screws. Arrows show location of screws.

5.15 Slide brushroll end cap out to remove.

5.16 Pull both brushrolls toward user to remove from unit. NOTE: Belt will still be attached to unit.

5.17 To remove upper belt cover, remove 7 screws. Arrows show location of screws.

5.18 Flip cleaner upright and remove upper belt cover from foot.

5.19 Remove pivot clamp by unscrewing 2 screws.

5.20 Lift pivot clamp off the unit after removing screws.

5.21 The belt shaft is now exposed (as shown in image 5.22)

How to Replace

5.22 Replace belt by placing on shaft.

5.23 Replace pivot clamp and 2 screws over the belt.

5.24 Replace upper belt cover, flip cleaner, and screw in 7 screws.

5.25 Slip brushrolls through belt. NOTE: Place belt on rounded areas of the brushrolls without brushes.

5.26 With belt in place, push and slide brushrolls into unit, making sure that the brushrolls are in the correct orientation.

5.27 Slide belt roll end cap back into unit and replace 3 screws.

5.28 Replace belt guard and secure with final 3 screws.

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below.

Any other servicing should be done by an authorized service representative.

If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.

Cleaner won’t run

1. Power cord not firmly plugged into outlet.

2. Blown fuse or tripped breaker.

3. Needs service

Cleaner won’t pick-up or low suction

1. Dirty Water Tank is not installed correctly.

Review Placing Dirty Water Tank in base of cleaner - Pg. 8.

2. Dirty Water Tank is full.

Empty Dirty Water Tank - Pg. 8.

3. Dirty water tank is clogged.

Clean Dirty Water Tank - Pg. 11.

4. Air path is clogged.

Unclog air path.

Water escaping from Cleaner

1. Dirty Water Tank is full.

Emptying Dirty Water Tank - Pg. 8.

2. Dirty Water tank is not installed correctly.

Review Placing Dirty Water Tank in base of cleaner - Pg. 8.

3. Clean Water Solution Tank not installed properly.

Review Clean Water Solution Tank Installation - Pg. 7.

Cleaner won’t dispense

1. Clean water solution tank is empty.

Fill cleaner solution tank.

2. Clean Water Solution Tank not installed properly.

Review Clean Water Solution Tank Installation - Pg. 7.

3. Needs service.

Take to service center. To find nearest location, visit our website at www.hoover.com or call 1-800-944- 9200.

Motor noise becomes high-pitched

1. Dirty Water Tank is full.

Empty Dirty Water Tank - Pg. 8.

2. Dirty water tank is clogged

Clean Dirty Water Tank - Pg. 11.

3. Air path is clogged.

Unclog air path.

4. The float in the Dirty Water Tank has been activated

Review Emptying & Cleaning the Dirty Water Tank - Pg. 11.

Brushrolls are not spinning

1. Belt needs to be changed.

Refer to how to change belt - Pg. 13.

Tempting Tastes Asian Restaurant

Address: 142A Pakington St, Geelong West VIC 3218, Australia

Wearing flip - flops can increase the risk of glass cuts, stubbed or broken toes and torn nail beds You even

Learn if your bank is owned by a bigger bank and what this means for you as a Commonwealth Bank , Westpac, NAB, Bank of Queensland, Bendigo Bank

• The mutual benefits of cooperation increase incentives to learn.
• How do you suggest I manage this dilemma to our mutual benefit?
• The result was of mutual benefit, both sides understanding more about how the other works.