Neelofar Malnad

This guide describes how to start and how to use the CGMiner version 3.7.2 and higher.

Download from site Download releases Download from BitcoinTalk

Here is a listing of the contents of the file cgminer.conf. It is also better to fill it in:

Setting up is relatively easy once you know all the basic commands.

The main .bat file setting has the following data:

Cgminer –scrypt –o stratum+tcp\\:pool_address:port –u wallet.1 – p x

Here:

This completes the configuration of the bat file.

To get a fine configuration, you need to use a number of special commands:

-auto-fan – adjusting the speed of the GPU cooler to maintain a certain temperature. Sets the metric automatically.

-auto–gpu – sets the GPU frequency to maintain a certain temperature. Works automatically.

-device (-d) – defines a specific video card. By default, the program launches everything it detects. The value of the card is placed next to it (for example, -device 1).

-disable-gpu (-G) - disabling graphics processors.

-gpu-threads (-g) - setting the amount of threads on the graphics processor. The indicator is set from 1 to 10. By default, the program sets 2. The value is placed next to the command - -gpu-thread.

-gpu-dyinterval - setting the refresh period in milliseconds for video adapters using dynamic intensity. Standard cost -gpu-dyinterval.

-gpu-engine- setting the frequency indicator for the video adapter. It is permissible to enter both one indicator and a whole range. It looks like this: -gpu-engine 700 or 700-900.

-gpu-fan - setting the fan speed in percentage, a certain value or range. It looks like this: -gpu-fan 50 or 50-65.

-gpu-map - matches OpenCl with ADL hardware number manually or paired CSV. For example, 1: 0.2: 1 shows OpenCl 1 over ADL 0.2 over 1.

-gpu-memlock - setting the memory frequency. In the case of bitcoin mining, we recommend lowering it, for litecoin - raising it. Looks like that: -gpu-memlock

-gpu-memdiff - sets the specific difference between kernel and memory. The indicator is entered in megahertz. It looks like this: -gpu-memdiff ???.

-gpu-powertune - GPU powertune installation. The value is selected in%.

-gpu-reorder - re-sorting video cards.

-Gpu-vddc - change the voltage on the core. The data is entered in this form: -gpu-vddc125.

-intensity (–I) - sets the intensity. The range of selectable indicators is from one to 14. Setting the value “d” - indicates that the indicator is dynamic. It looks like this: -intensity 10 or d.

-kernel (-k) - specifying the kernel for the hardware. It can be diablo, poclbm, phatk, diakgcn. It looks like this: -kernel diakgcn - help is needed in choosing kernels for GPUs.

-ndevs (-n`) - displays a list of graphics processors, number and outputs.

-temp-hysteresis - the temperature difference in ℃ from the expected indicator is indicated. The standard cost is 3. It looks like this:-temp-hysteresis

-temp-overheat - temperature, specified in ℃, when dropping core frequencies. This is where the coolers work faster (rpm increase). Fitted as standard 85. It looks for example like this: -temp-overheat 95.

-temp-target - the desired temperature is set. The value is in degrees. Standard costs 75. It looks like this: -temp-target 90.

-vectors (-v) - sets the width of vectors. By default, the indicator is selected automatically, but you can specify your own: 1, 2 or 4. Here it is indicated as follows: -vectors

-worksize(-w) - the size of the memory is set. However, it has virtually no effect on performance. Automatic selection of the indicator is standard. When self-introduction, select it in multiples of 64: 64, 128, etc. Recommended 256. Looks like this: -worksize

setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 2 cgminr.exe –srypt –worsize 512 –intensity 10 –auto-fan –lookup-gap 4 –thread-concurrency 25614 – gpu-engine 1050 –gpu-memlock 1500 –gpu-powertune 15 –o stratum+tcp: east1.us.stratum.dedicatedpool.com:3352 u worker -p XXX

where XXX is the worker password.

Please note that the miner is also compatible with Linux and OSX. In the case of Linux, you can also enable remote access. However, it will not be possible to configure the operation of the video adapter as efficiently as on Windows.

The program is aimed exclusively at experienced users who are mining cryptocurrencies. Consequently, the functionality is versatile. The software was launched back in 2011. Since then, it has only improved and increased its positive qualities. The launch was made with open source code, which allows you to be confident in the reliability of the software.

The main developer was Kon Kolivas. He is also known for contributing to the development of Linux. At the same time, he is an anesthesiologist by profession, developing programs for him is a simple hobby.

The program is recognized as the most effective software for the extraction of electronic tokens using AMD and NVidia video adapters.

The software allows you to improve the performance of video adapters, making it possible to fine-tune graphics devices.

Most of the known digital coins can be mined on these algorithms. It is used in the mining of Bitcoin, Dogecoin, Monero, Litecoin and other well-known digital tokens. Provides a number of benefits:

The official site allows you to download the software for free. However, please note that the latest versions of the program focused exclusively on ASICs and FPGAs, since the developers decided not to continue to support mining on CPUs and video processors. It is worth using old software releases for them. These include versions prior to 3.7.8.

Basically, it is worth working on AMD, since the software does not work well with CUDA. For NVidia, it is better to choose another miner, for example, Claymore.

The program has several interesting points. One of them is the introduction of tools to overclock GPUs and set the desired fan speed in the cooling system. True, it is worth using this functionality carefully, since there is a high chance of spoiling the equipment and sending it to the scrap.

The program also provides configuration information, automatically turns off the worker, causing problems or simply not working. You can use proxy, balance loading strategy and Round Robin. Thanks to this, miners can independently enter the parameters of the width of the vectors, the waiting time for the connection restoration, create a specified delay for the router and configure a separate display of notifications. The work of the program is configured through a special configuration file.

The total straight line distance between Elgin and Lossiemouth is 6 KM (kilometers) and 4879 meters The miles based distance from Elgin to Lossiemouth is 38

BENSALEM, Pa - Philadelphia rapper PnB Rock has pleaded guilty in a case involving drugs and a stolen gun stemming from a 2019 arrest in

Harlech is a seaside resort and community in the North Wales county of Gwynedd and formerly in the historic county of Merionethshire