Connect related published Questions

#Answer#

Sanjay Hertz answered

1. Connect your mobile device to the same Wi-Fi network as your TV.
2. Launch the Netflix app on both your TV and your mobile device.
3. Sign in to the same Netflix account on both your TV and your mobile device.
4. Select the Cast icon.

#Answer#

Gangadhar ljnzczf answered

1. On the front of your Gamepad, press and hold the Power button. . After 3 seconds, you'll see 4 lights flash.
2. From the Android TV Home screen, scroll down and select Settings .
3. Under "Remote and accessories," select Add accessory .
4. Select your Gamepad.

#Answer#

Abu Iman answered

Pairing the Earphones with Bluetooth® devices > Go to "Bluetooth" Settings on your Bluetooth device (phone, tablet, etc.) » Turn the Bluetooth ON, on your device. > Press the charging case power button, make sure the Earphones are in charging status.

#Answer#

Ivy yrobhs answered

Press Windows + R, type “regedit ” in the dialogue box and press Enter to launch the registry editor. Once in the registry editor, click on File > Connect Network Registry. Enter the details of the remote computer and try connecting.

#Answer#

Guimalan jzdt Christian answered

1. Tap on the KYC icon.
2. Enter your Aadhaar Details and validate OTP.
3. Verify your information and tell us few more details.
4. That's It, your KYC is done.

#Answer#

Thakur Cristov answered

1. Make sure your amp is turned off.
2. Connect your guitar cable to your guitar.
3. Then plug the other end into the “input” side of your pedal.
4. Plug another guitar cable into the “output” side of your pedal.
5. Then plug the other end into the “input” on your amp.

#Answer#

Meenaxi Asif answered

1. Click Start then Devices and Printer (Windows 7) or Start then type Control Panel and then Devices and Printers (Windows 10)
2. Right-click the appropriate printer and choose Printer Properties.
3. Click the Advanced tab.
4. Click Printing Defaults…

#Answer#

Luis Reynolds answered

Step 1: Find the IP or Hostname of the printer you want to add. Go to the printer and click “Device Information” on the main menu screen. The next screen will show both the IP and the Hostname of the printer. Write down both or either, they will be used later.

#Answer#

El Jimmy answered

1. Step 1: Buy KCS on Kucoin.com.
2. Step 2: Withdraw the KCS to a Private Wallet like Metamask.
3. Step 4: Visit the below Koffeeswap Exchange page and connect Metamask Wallet.
4. Step 5: Go to Basics.
5. Step 6: Click on Swap and Approve your Transaction.

#Answer#

Vanhi Dugal answered

1. Log in to the FINAL FANTASY XIV: Mog Station with your Square Enix ID.
2. Select the 'Your Account' menu from the top of the screen.
3. Select 'Enter Item Code,' then follow the on-screen instructions to redeem your code.

#Answer#

Shehzad Jalili answered

Use mode button on back of speaker to put in Bluetooth mode. Then on phone go to settings, Bluetooth, and find QFX Under My Devices. Just tap QFX and as long as you are in range, it should connect automatically.

#Answer#

rnsp Tantano answered

1. Download & Install the SJCAM Zone app.
2. Turn on the camera's WiFi.
3. Connect your mobile to the camera's WiFi.
4. Open the SJCAM Zone app.
5. Select the Camera icon and press the blue button.

#Answer#

Priyadarshi xabem Zara answered

You can connect up to three devices via the Unifying Receiver or Bluetooth . For the latter you press one of the Easy Switch buttons until its LED blinks to indicate it's in pairing mode. Then find and select MX Keys from the list of available Bluetooth devices on the laptop, tablet, or phone you're trying to connect.

#Answer#

Sudhir occaam answered

Connect one pair of RCA cables between the equalizer and amplifier. Connect one pair of cables to the pre-amp output channels on the amplifier and the other end of the cable to the pre-amp input channels on the equalizer. You will usually find these channels on the rear of the equalizer.

#Answer#

Michaels Masud answered

Open up your Bluetooth settings on your phone/ or other device. Then, ask “Alexa, connect to Bluetooth. ” Give it a few seconds, and the connect to your echo dot. Once connected, play your music on YouTube.

#Answer#

Saksham wfxp answered

1. Insert a sufficiently charged battery pack into the camera.
2. Turn on the camera and the computer.
3. Check that [USB Connection] under (Setup) is set to [Mass Storage].
4. Connect the camera to the computer using the micro USB cable (supplied).

#Answer#

Apollonia Finnerman answered

To get started, connect Apple TV to your smart TV. Navigate to the Zwift app on the screen and go. Alternatively, you can swipe on your iPhone or iPad screen, select AirPLay then select Apple TV. It's essential to make sure that your Apple TV is connected to the same wireless network as your iPhone, iPad, or smart TV.

#Answer#

Markéta Wahlberg answered

Hold down the Bluetooth button (on the back of the speaker under the power button) until you hear a tone. NOTE: The Bluetooth connection button will blink rapidly, meaning the speaker is ready for pairing. On your device, go to the Bluetooth menu and scan for devices. Tap ROLL to pair.

#Answer#

Nijel Edition answered

1. 1860 120 7777. ICICI Bank customers can call the following toll-free number to get their queries regarding wealth management or private banking resolved 24×7:
2. 1800 103 8181. Private banking customers can also reach out to the bank at the following number:
3. 1860 120 3399.

#Answer#

Fazmi Mounica answered

1. Make sure that your Modem is connected to the internet.
2. Connect your modem to the internet port on your router.
3. Connect your DVR to one of the data ports of your router.
4. Connect your DVR to your monitor.

#Answer#

Vishwamitter Tahil answered

Download the official Oculus app , which is the software that will run Oculus Link and allow you to play PC VR games on your headset. You can get it here, listed as Oculus Link setup software. Oculus Link also works with SteamVR, so make sure to download Steam and install SteamVR if you want to play any of that content.

#Answer#

Alberto Sharbino answered

For any queries regarding recharge plans, data balance, validity, recharge confirmation and offers call 1991 (toll free) from your Jio number. To register any complaint, you can call us on our Customer Care Number 198 (toll free). If you are calling from other numbers you can reach JioCare on 1800 889 9999 .

#Answer#

Sabiha vtcvea answered

1. Go to Start and expand the Start Menu to select Settings.
2. Select Devices.
3. Go to Bluetooth & other devices from the left pane.
4. In the Add a device window, select Bluetooth.
5. In the list of Bluetooth devices, select the Logitech device you want to connect to and choose Pair.

#Answer#

Balooni Frederik answered

Download VMR Connect to your PC or Mac, then install it by following on-screen instructions. After installation, make sure your phone and computer are on the same network/WiFi, then open the VLC Mobile Remote app on your phone. As soon as you open the app, it will detect and allows you to connect to your computer.

#Answer#

Rach uzav answered

1. Search V LIVE - Star Live App​​ in Google Play.
2. Download and Install V LIVE - Star Live App​​
3. Enjoy playing V LIVE - Star Live App​​ on PC with MEmu.

#Answer#

vvalnvg Rashi answered

Look for your Jabra device in the list and tap on it to connect. Alternatively, search for “Bluetooth” in your Windows search box . When the Bluetooth & other devices window comes up, make sure Bluetooth is on then click “Add Bluetooth or other device” and select your device from the list.

#Answer#

Nazir Krusel answered

Tap or your profile picture in the bottom right to go to your profile. Tap in the top right, then tap Settings. Tap Accounts center at the bottom, then tap Set up accounts center. Tap Add Facebook account and log in to or select the account you want to connect.

#Answer#

Fabian gkmgwk answered

1. Step 1: Press the down arrow until you get to “Network.”
2. Step 2: Press the “OK” button.
3. Step 3: Press the down arrow until you get to “WLAN”
4. Step 4: Press the “OK” button.
5. Step 5: Press the down arrow until you get to “Setup Wizard”

#Answer#

fhqmqf Rafiq answered

1. Click the Get Started button.
2. Login with your YouTube TV credentials.
3. Sign in or register with an MLB.com account to link to your YouTube TV account.
4. After you have linked your accounts, use your MLB.com email address and password to access MLB.TV on any of our supported devices.

#Answer#

Rishabh Aman answered

1. MISO connects to pin 12 of the Uno.
2. MOSI connects to pin 11 of the Uno.
3. SCK connects to pin 13 of the Uno.
4. CE connects to pin 9 of the Uno.
5. CSN connects to pin 10 of the Uno.
6. GND and VCC are connected to GND and 3.3V of the Uno.

#Answer#

Howard Battivala answered

3.2 Download the Bfit GAME App from your App store on your Smartphone or scan the QR code below for the installation. 3.3 Ensure that your Smartphone's Bluetooth is turned on. Do not attempt to connect the Bfit Device via your Smartphone's Bluetooth settings. 3.4 Open the Bfit GAME App once the download is complete.

#Answer#

Ryan niivxrs answered

1. Open iTunes.
2. Connect your iPhone to your PC via USB.
3. Click on the device icon.
4. Click Settings on the left side of iTunes to see the types of content you can sync.
5. Click on the content you want, then click on Sync in iTunes.
6. Click Apply in the lower right corner of iTunes.

#Answer#

M.S. Hare answered

1. Tap in the bottom right of Facebook.
2. Tap Pages, then go to your Page.
3. Tap .
4. Tap WhatsApp.
5. Tap Sync Info.
6. Tap Continue.
7. Review the information you're providing, then tap Confirm and Sync.

#Answer#

Llama qepov Queen answered

1. Put the controller or gamepad into Bluetooth pairing mode and make sure it is discoverable. See the product's user manual for how to do this if needed.
2. Navigate to the Bluetooth device list on your TV and select the controller or gamepad to pair with.

#Answer#

Post ktti answered

1. Sign in with your Binance accountConnect your Binance and WazirX accounts to start buying/selling crypto.
2. Place an order on WazirX P2PYou'll be auto-matched with a seller instantly.
3. Pay directly to the sellerYou will receive USDT in your WazirX wallet once the seller confirms receiving your payment.

#Answer#

Simi Aly answered

1. Press the HOME button.
2. Select Settings → Network & Accessories → Touchpad Remote Control or Voice Remote Control.
3. Select Pair Touchpad Remote Control or Activate the MIC button.
4. Follow the on-screen instructions.

#Answer#

Maitreya Date answered

1. Create a database service with PDB property using the SRVCTL utility.
2. Create an entry in the tnsnames. ora file for the service created.
3. Start the service.
4. Connect to the database using the service with the pdb property, created in step a.

#Answer#

Kameshwor Norwood answered

1. Create a new repository on GitHub.com.
2. Open TerminalTerminalGit Bash.
3. Change the current working directory to your local project.
4. Initialize the local directory as a Git repository.
5. Add the files in your new local repository.
6. Commit the files that you've staged in your local repository.

#Answer#

Shana Santillo answered

1. Visit BPI Online of download the BPI Mobile app.
2. Click “Register Now.”
3. Select your preferred product type (deposit, credit card, loan).
4. Enter your account number, customer number, or loan account number.
5. Select your date of birth.
6. Create your username and password.
7. Type your email address.

#Answer#

Ramji Veerappan answered

Turn on Bluetooth on your smartwatch. Go to Settings on your iPhone, tap on Bluetooth. Wait till your watch shows up on your iPhone. Tap on the watch model you are pairing and accept the Bluetooth pairing request.

#Answer#

Mudgal pepijnhm Shitiz answered

1. Plug in with a USB data cable. Nearly all smartphones and tablets can plug into a TV's HDMI port using a USB cable like this 6-foot Data Cable for USB-C.
2. Use Google Chromecast Ultra.
3. Connect via your smart TV.

#Answer#

Sanyuktha Chhaya answered

Power off the original controller of PS4. Connect the Racing Wheel with PS4 controller by Micro USB cable 3 Plug the USB of Racing Wheel into PS4 USB interface. Press the button of "MODE". After that the Racing Wheel can start to play game and setting.

#Answer#

Jatasya Sinha answered

1. Use an HDMI Cable to Connect Your Laptop to the Monitor. HDMI stands for High-Definition Multimedia Interface.
2. Extend Your Display with a DisplayPort Cable.
3. Connect with a USB-C Cable.
4. Use a DVI Cable.
5. Get an Adapter.

#Answer#

Shailesh Kango answered

To connect via Bluetooth, open Bluetooth settings and pair your mouse and keyboard. To connect via the Unifying receiver, start by configuring the keyboard to your operating system. Press Fn + O for Mac or Fn + P for Windows for 3 seconds . Once the LED blinks fast, you can plug in the receiver.

#Answer#

Blondie Guttenberg answered

2. Short press the power button on either headset (A or B) and wait until the LEDs of both headsets turn to blue blinking and intercom connection is automatically established. (Headset A is paired with Headset B) 3.

#Answer#

Sakharam Yash-Vinay answered

On your mobile device, tap Settings -> Bluetooth and then connect earbuds and mobile devices. Launch the Samsung Galaxy Buds app, and the follow the on-screen instructions to complete the connection. * The Samsung Galaxy Buds application connects Samsung Galaxy Buds+ and Samsung Galaxy Buds Live to your iPhone.

#Answer#

Subham zurdn answered

Power Off Place earphones into the Charging Pod or press and hold for 4 seconds. Pairing 1. Activate the Bluetooth® function on our device and select EFM TWS Valhalla. The earbuds will automatically pair with the device.

#Answer#

Akther M answered

Click on + on the upper right corner and click on 'Create Personal Automation'. Scroll down till you see 'NFC' and then tap on it. Click on scan and when iPhone prompts place NFC tag of your Bluetooth device on iPhones top. When you're prompted to enter tags name.

#Answer#

Elsie Oliansky answered

1. Turn on your device's Bluetooth feature.
2. Turn the headset on. The light on the headset should start flashing an alternating red-blue.
3. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
4. If prompted for a passkey, enter 0000 (four zeros).

#Answer#

kqkruhf Amir answered

Press FN+Q/W/E to pair with your three devices. When it's completed, press FN+P again, the backlight of P key will blink until the pairing process is done.

#Answer#

jxdavntw Samuel answered

1. Open the Paytm App & Tap on. 'Bank Transfer' Icon.
2. Link your bank account with Paytm. Choose the bank with registered mobile number as your Paytm Number.
3. Account link Successful.
4. Enter the Details of the A/C Holder.
5. Fill in the Amount to Be Transferred.
6. A 'Transaction Successful' Message Will Reflect on the Screen.

#Answer#

dzujlx Harvell answered

1. From the Server Manager, start iSCSI Initiator, and select Tools, iSCSI Initiator.
2. Click the Configuration tab.
3. Click Connect to connect to the target.
4. Select Enable multi-path check box to enable multi-path IO to the target.

#Answer#

qlnb R answered

1. Sign in to the Zoom web portal.
2. Click Room Management > Zoom Rooms.
3. Click Account Settings.
4. Click the Meeting tab.
5. Navigate to the Display meeting list on TV option and verify that the setting is enabled.

#Answer#

mwukpens Prince answered

Turn on the Bluetooth in your BT enabled device and start the speaker into Bluetooth mode; once you are in Bluetooth mode search for “iBall Musi Bar“ and connect it. 2. Once the connection is successful music can be played wirelessly.

#Answer#

Bhowmik Sumit answered

When you want to sync your run from your watch, open NRC app on your phone and in the Activity tab refresh it by scrolling down . If your run doesn't automatically appear there, open NRC app on your watch and you should see your unsynced run there.

#Answer#

myvo Mahmood answered

1. Search for Wifi networks from Mobile or Laptop etc.
2. Go to wi-fi setting and select the railwire network.
3. Open an Internet Browser, then go to railwire.co.in website.
4. Enter your Phone Number in Wi-Fi Login Screen.

#Answer#

Syed Kam answered

1. Go to Window > Open Perspective > Other > CVS Repository Exploring.
2. Right-Click in the CVS Repositories area and select New > Repository Location.
3. Enter. Host: cslab.skidmore.edu.
4. Click Finish and you have now setup a connection to the Linux Lab's CVS Repository.

#Answer#

aroq Saroj answered

Log into your Shopify account. Locate the “Sales Channels” list at the bottom-left of the page. Click on the plus (+) to the right of “Sales Channels.” In the pop-up list that appears, locate the option for “eBay ” and click the “Plus” button to its right.

#Answer#

Lisa Kagti answered

1. To access VDI, begin by visiting the webpage https://virtual.swtc.edu.
2. Once your webpage loads, you should see a screen with a prompt like the one shown below:
3. Select "VMware Horizon HTML Access" on the right to proceed.
4. A new screen should load prompting for login credentials.

#Answer#

Amit Espinola answered

Connect your Raspberry Pi using the PC Ethernet Port using a straight Ethernet Cable . It should be pretty obvious. Connect the USB-Ethernet Adapter to the Crossover Adapter and then connect the Ethernet port on the adapter to the one on the Pi. Make sure you hear that “click” to make sure things are connected.

#Answer#

aree Aqil answered

First, install KDE Connect on your Android phone via Google play store . Then on your Ubuntu computer, open a terminal and run the following commands to install KDE Connect from PPA. Once it's installed, launch KDE Connect Settings from Unity Dash or your application menu.

#Answer#

I.S.Johar Ramlal answered

Press and hold the Bluetooth button for 3-4 seconds until the Bluetooth light starts blinking rapidly. This will make the phone ready to connect to the speaker. On your device, enable Bluetooth in the settings menu and select “A33” from the device list. If your device ask for the passkey, use “0000”.

#Answer#

Creators Mayank answered

Ensure your TrueConnect earbuds are switched on. Hold the control button down for 5 seconds to activate pairing mode. Search discovered devices within your source device's Bluetooth® settings, tap 'RHA TrueConnect' to complete pairing of your earphones.

#Answer#

Lottie Perilli answered

Answer: Hi, open your bluetooth, download the Ehome light app then open this app, click to the top left corner then you can connect it.

#Answer#

Ric Eman answered

1. Power on the router and connect your PC to the router using an Ethernet cable.
2. Once connected, open a web browser and head over to 192.168.0.1 or www.tplinkwifi.net.
3. Set your router login password by entering it twice.
4. Click on Let's Get Started/Login.

#Answer#

guyqjhu M answered

Q: How to tune FM channels? Connect the micro USB cable to the micro USB port of the speaker and leave the other end free (this cable will act as the FM antenna). Long press the mode("M") button once to scan the FM channels. To change the channels you can use +/- buttons.

#Answer#

Yashi Barbie answered

1. Log into Garmin Connect.
2. Click the circular Profile icon in the upper right corner.
3. Select Account Settings.
4. Click Display Preferences (left-side)
5. Change Measurement Units to preferred setting from drop down list.

#Answer#

Rashi Sean answered

1. Make sure that a Network Setup has been set up properly.
2. Make sure that Media Sharing has been enabled on the computer.
3. Turn on the TV.
4. Press the HOME button.
5. Use the left arrow or right arrow to select Settings → Network → Home Network Setup.
6. Select Remote Device / Renderer → Remote Device List.

#Answer#

Pushpendra Chandra answered

1. Step 1: (recommend to use chrome, because using another browser will take years for it to load the bot, on chrome its instant)
2. Step 2: Click on "Add New App"
3. Step 3: From here you can make your bot however you desire but..

#Answer#

Naresh amwffxp answered

In your Logbook, click on the profile icon on the top right and select Edit Profile. Click on the Applications tab. Click on Connect To the application you prefer.

#Answer#

Xavier Hashtag answered

1. Connect the PIR sensor's pin labelled VCC to the 5V pin on the Raspberry Pi. This provides power to the PIR sensor.
2. Connect the one labelled GND to a ground pin on the Pi (also labelled GND). This completes the circuit.
3. Connect the one labelled OUT to any numbered GPIO pin on the Pi.

#Answer#

Hardik Lachman answered

Select Dataset on the Choose a Database Model page, and then select Next. On the Choose your Data Connection page, select New Connection to configure a new data connection. The Add Connection dialog box opens. If Data source is not set to Microsoft Access Database File, select the Change button.

#Answer#

Rohan Barreto answered

PAIRING NEW / ADDITIONAL BLUETOOTH DEVICES: When earbuds are powered off, press and hold Right Earbud button 10+ seconds. The earbud will flash blue and white indicating it is ready to pair to your Bluetooth device. Once connected, turn on Left Earbud to auto connect both earbuds .

#Answer#

Jorgen Nebbia answered

Use a High Speed Type HDMI cable (not supplied) to listen to TV sound from the speaker. Connect a High Speed Type HDMI cable to the HDMI ARC TO TV port on the speaker and the HDMI IN ARC port on your TV.

#Answer#

Zara Sushila answered

On your PS4 controller, press the Playstation and Share buttons at the same time. Hold them down until the light on your controller starts to flash. You should see “DUALSHOCK 4 Wireless Controller” pop up in the Bluetooth menu on your iPhone under other devices. Click that to pair your controller.

#Answer#

kqryvogm Manu answered

There are two ways you can place your umbrellas during photography lighting. If you use a shoot-through umbrella then place the umbrella towards the strobe and point the strobe towards the subject . For reflective umbrellas, just point the umbrella towards the subject and strobe towards the umbrella.

#Answer#

qpce por answered

Open up PowerBI Desktop and on the home ribbon click Get Data. Highlight the SharePoint Folder and click Connect to continue. Upon clicking connect you will be presented with another screen asking for the SharePoint folder location. In the URL window you will add the SharePoint site that we identified above.

#Answer#

Neelofar Gupta answered

1. Create a PHP variable which will store the URL in string format.
2. Check whether the HTTPS is enabled by the server .
3. Append the HTTP_HOST(The host to which we have requested, e.g. www.google.com, www.yourdomain.com, etc…)
4. Append the REQUEST_URI(The resource which we have requested, e.g. /index.

#Answer#

Nitin Temrikar answered

1. Place the Brother machine within range of your WPS or AOSS™ access point/router.
2. Make sure that the power cord is plugged in.
3. Turn on the machine and wait until the machine is in the Ready state.
4. Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.

#Answer#

Jagdeep Gazmer answered

1. Go to “Settings“, and choose “WiFi. “
2. Click on the three dots in the corner to find the option for “Advanced“. Choose “WiFi Frequency Band. “
3. Select 5GHz so that all networks using this band will come up. You can now click on the preferred network you want to connect to.

#Answer#

Freya Cher answered

1. Go to the Control Panel.
2. Click Network and Internet > Network and Sharing Center > Change adapter settings.
3. Select the connection for which you want to configure Google Public DNS.
4. Select the Networking tab.
5. Click Advanced and select the DNS tab.
6. Click OK.
7. Select Use the following DNS server addresses.

#Answer#

Vasan Pataskar answered

1. Open QGIS.
2. Go to Layer > Add Layer > Add ArcGIS MapServer Layer..
3. In the Dialog box click the "New" button.
4. In the "Create a new ArcGISMapServer connection" window enter the name "ODNR Landbase" and paste the URL from Step 1 into the URL field and click the "OK" button.

#Answer#

Hanif Shiromani answered

1. Step 1:Go to WiFi Settings on your Laptops / Desktops.
2. Select your JioFi device (SSID*) from the list of available SSIDs*
3. Step 3:Enter your JioFi Password* when prompted.
4. Your Laptop/Desktop (Wi-Fi Capable) is now connected with your JioFi.

#Answer#

Sien Dips answered

How To Fix KPLC CIU Connect Error. Solution 1: Ensure you plug in your meter to the socket (not extension). If this fails, look for RECHARGEABLE batteries, plug in to the socket. Solution 2: Ensure that the CIU cable is not faulty by using another CIU cable then plug it back to the socket.

#Answer#

Cockayne Aprilyn answered

1. Make sure Bluetooth is activated on your mobile device.
2. On your STARLINK multimedia screen, click Setup > Bluetooth > Add.
3. On your mobile device, select your Subaru STARLINK system in the Bluetooth menu.
4. Your mobile device and Subaru STARLINK system are now connected via Bluetooth.

#Answer#

Sha Krishna answered

Press and hold the blue tick button on the device for 5 seconds until it beeps and you see the Bluetooth icon on on the Zettle display. Go to settings on your device, turn on Bluetooth and wait until "iZettle ### " shows up on the list. Select it to begin to connect.

#Answer#

Bruce dtsupso answered

Right-click on your Java Project in the Package Explorer in the Eclipse workspace and go to Properties Go down the list that appears until you find Java Build Path and click Libraries and then click Add External Archives . Find the downloaded jar file called mysql-connector- java-version number. jar and choose it.

#Answer#

Sarojini Ramachandran answered

1. Launch any of your favorite browsers.
2. Type in the address 192.168.0.1 in the address bar.
3. Enter the user name and password.
4. When you log in to the router for the first time, you will be prompted to change it.
5. Enter the Quick Setup option.

#Answer#

Brij Vaghani answered

1. Find the process id (pid) with the ps command: $ ps -C program -o pid h pid. Replace program with a file name or path to the program.
2. Attach GDB to this process: $ gdb program -p pid.

#Answer#

nqfskw Sardar answered

1. Slide the hollow tube portion of the connector (lovingly called the ferrule) over the cable.
2. Cut the end of the cable off cleanly.
3. Use the stripping tool to strip the cable.
4. Insert the solid center conductor into the center pin.

#Answer#

Bidun Shamoon answered

1. Go to your phone's Settings Option.
2. Click on Mobile Data/Internet Setting/Cellular or Network Settings.
3. Now choose Mobile Network.
4. Go to Access Point Name (APN).
5. Set Name as Ncell and APN as Web.
6. Just save the setting.

#Answer#

Carlos Dadachandji answered

Power Off Place earphones into the Charging Pod or press and hold for 4 seconds. Pairing 1. Activate the Bluetooth® function on our device and select EFM TWS Valhalla. The earbuds will automatically pair with the device.

#Answer#

Arija Larrieu answered

1. Go in your web.config file.
2. Find the connectionStrings section.
3. Setup your connection string to use the sql server 2014. < add name="DefaultString" providerName="System.Data.SqlClient" connectionString="Server=YourServer;Database=YourDatabase;UID=YourUserId;PWD=YourPassword;" >

#Answer#

Shaikh Stanislaw answered

Hold your earphones next to your unlocked device. Press and hold the power button on your earphones. When the indicator light flashes, your earphones are discoverable. Open the Bluetooth menu on your Mac, Android device, or other device.

#Answer#

Asraf zcvdvj Tere answered

1. Select Network. Press OK. (This step might be skipped in some models.)
2. Select WLAN. Press OK.
3. Select Setup Wizard. Press OK.

#Answer#

Dina Mannan answered

» Make your Bluetooth device “discoverable” » Power on speaker » The first time the unit is powered on it will enter auto-pairing mode. » To manually pair, press and hold Bluetooth Button for 2 sec. » Select “iHome iBT620” on your device's Bluetooth menu to complete pairing.

#Answer#

Kate wtjfou answered

1. Connect the device and the computer to the same Wi-Fi network.
2. Plug the device to the computer with a USB cable to configure the connection.
3. On the computer command line type: adb tcpip 5555.

#Answer#

sobvlthm Duarte answered

1. Insert two AAA batteries into the mouse.
2. Replace the battery compartment cover.
3. Insert the software installation disc into the optical drive.
4. Press the link button on the receiver, then turn the mouse over and press the link button on the mouse.

#Answer#

Ikraam djae answered

1. Connect the webcam to your laptop.
2. Install the webcam's software (if necessary).
3. Wait for the setup page to open for your webcam.
4. Follow any instructions on the screen.
5. Press the Install button, then select your preferences and settings for the webcam.

#Answer#

Suzane Dhirendra answered

1. Step 1 Connecting TI-Nspire to a Computer.
2. Make sure you have a TI USB cable to connect your calculator and computer.
3. Insert the plug into the the slot at the top of the calculator.
4. Connect the calculator to the computer through the USB port.