note_addAdd Question
mode_editWrite Article
notificationsNotifications
0

Enable related published Questions

How to enable cdp in cisco?

#Answer#

Nagda czobdb Kaits answered


To enable Cisco Discovery Protocol (CDP) on an interface, use the cdp enable command in interface configuration mode . To disable CDP on an interface, use the no form of this command. This command has no arguments or keywords. Enabled at the global level and on all the supported interfaces.

How to enable fm radio on lg g5?

#Answer#

Brea Grazer answered


Connect a headset to the headset socket. Tap Tools. Tap FM Radio . Tap the on/off icon and wait while the radio searches for channels.

How to enable xhr in safari?

#Answer#

Nodelman lpgamk Bostjan answered


Under the Network tab , you will see a tab for XHR. As I type in my search form, it will populate by character. I can then click on the last Name that is shown and can see a Summary. This gives you the URL where your data is pulling from, the Status, Source, etc.

How to enable dnd in vodafone?

#Answer#

R aihiuqfg Col answered


You can easily activate DND on your Vodafone number by sending an SMS or making a phone call. To activate DND by SMS you need to send SMS to 1909 (toll-free) . Customer can change/modify DND services with keywords mentioned on the official website. You can even call IVR 1909 (toll-free) to activate the DND service.

How to enable fdn for android?

#Answer#

Aadar Randev answered


  1. From the application tray, touch Settings > Phone > Fixed Dialing Numbers.
  2. Touch Enable FDN.
  3. Enter the FDN PIN, and touch OK.
  4. Touch Manage FDN List.
  5. Touch > Add Contact.
  6. Enter a name and a number, and touch Save.

How to enable office intelligent services?

#Answer#

Rod Thakur, answered


  1. Click the File tab in Word, Excel, PowerPoint, or Outlook.
  2. Click Options.
  3. Click the checkbox labeled Enable services, then click OK.

How to enable ghost mode life360?

#Answer#

Dharam Channa answered


  1. Turn on battery saver mode to stop apps from background refreshing.
  2. Turn off Wifi and data.
  3. Get to Setting, find Life360, turn off Celluar Data, Background Refresh, and Motion & Fitness.
  4. The location on Life360 will pause on the place.

How to enable rdp in linux?

#Answer#

Frederik qtijl answered


To enable remote desktop sharing, in File Explorer right-click on My Computer → Properties → Remote Settings and, in the pop-up that opens, check Allow remote connections to this computer, then select Apply.

How to enable gst in tally prime?

#Answer#

Costinel Sudhir answered


  1. Press F11 (Features) > set Enable Goods and Services Tax (GST) to Yes.
  2. If you do not see this option: Set Show more features to Yes. Set Show all features to Yes.
  3. Set the option Enable GST classification to Yes.

How to enable aero glass in windows 10?

#Answer#

Ameem Rekha, answered


Browse to the left-hand pane to Appearance > Aero Lite. Here, Enable Aero Lite, a hidden theme in Windows 10 (and Windows 8. x). Once you've done this, switch to the Appearance > Alt+Tab Appearance screen .

How to enable print screen in windows 7?

#Answer#

Malik puvipuo answered


  1. Open Snipping Tool. Press Esc and then open the menu you would like to capture.
  2. Pres Ctrl+Print Scrn.
  3. Click on the arrow next to New and select Free-form, Rectangular, Window or Full-screen.
  4. Take a snip of the menu.

How to enable vcenter ha?

#Answer#

Walker Prakash answered


  1. Log in to the Active node with the vSphere Client.
  2. Select the vCenter Server object in the inventory and select the Configure tab.
  3. Select vCenter HA under settings.
  4. Click on the Set Up vCenter HA button to start the setup wizard.
  5. Click Management vCenter Server credentials.

How to enable original sound in google meet?

#Answer#

Delisha Smith answered


  1. On your computer, open meet.google.com.
  2. Join a video call.
  3. Before you join or during the call, click More Settings .
  4. On the left, click Audio. the setting you want to change: Microphone. Speakers.
  5. Optional: To test your speakers, click Test.
  6. At the top right, click Close .

How to enable hsn code option in tally?

#Answer#

Radeva thil Shoaib answered


To configure this, Go to “ Accounts Information ” > “Groups” > click on “Create” > Select the “Sales Group” (Select the ledger group for which you want to set up HSN code) > Against “Set/ alter GST details”, enter “Yes” and enter the HSN code here.

How to enable rage mode 6900 xt?

#Answer#

Xzibit Ludacris answered


Click on the "Performance" tab at the top, and select the "Tuning" sub-tab under it. You will then see the option to select the Tuning Preset, as seen in the image below. Click on "Rage " and you're good to go!

How to enable ee voicemail?

#Answer#

Awais wkgjh answered


How do I turn voicemail on and off? To turn it on just text VM ON to 150 from your device.

How to enable lpr in windows 2016?

#Answer#

Shay mjwoumlv answered


1. Enable the LPR Monitor in Windows Features by navigating to Start > Control Panel > Programs > Programs and Features > “Turn Windows Features on or off.” Navigate to Print and Document Services, expand the menu and check the LPR Port Monitor box.

How to enable xclock in linux?

#Answer#

Bindoo Mohindra answered


  1. Start xMing.
  2. Start xLaunch. 2a. Select Multiple Windows.
  3. can see the Xmin Server icon in my taskbar.
  4. Now I start putty. 4a.
  5. Command prompt.
  6. login as : I enter "root"
  7. Enter password.
  8. I see the last login details and then I see. root@server [~]#

How to enable irm in office 365?

#Answer#

Fritz mnxpbxe Unmol answered


In the left pane, choose Admin centers > SharePoint. In the left pane, choose settings, and then choose classic settings page. In the Information Rights Management (IRM) section, choose Use the IRM service specified in your configuration, and then choose Refresh IRM Settings.

How to enable js in chrome?

#Answer#

Elavendhan Gopal answered


  1. Open Chrome on your computer.
  2. Click. Settings.
  3. Click Privacy and security.
  4. Click Site settings.
  5. Click JavaScript.
  6. Turn on Allowed (recommended).

How to enable lpr in windows 2012?

#Answer#

Sangita Chonkar answered


In Windows 8.1/Server 2012 R2, click on the Start window - [Control Panel] - [Hardware and Sound] - [Devices and Printers]. On the toolbar, select [Add a printer]. Select this machine from the list, and then click [Next]. To use the LPR/Port9100 protocol, select the printer with its IP address.

How to enable ms store in windows 10?

#Answer#

Shoukat Ameer answered


Type gpedit in the search bar, and then select Edit group policy (Control panel) to find and start Group Policy Editor. In the console tree of the snap-in, go to User Configuration or Computer Configuration > Administrative Templates > Windows Components, and then click Store. Type gpedit in the search bar, and then select Edit group policy (Control panel) to find and start Group Policy Editor

How to make your keyboard qwerty?

#Answer#

Praveen gxuf Bart answered


  1. Tap and hold .
  2. Tap Input language & type.
  3. Tap each language to select as one of input languages.
  4. Tap to change the keyboard layout.
  5. Tap QWERTY keyboard, Phone keyboard, Handwriting, or Shape writer.

How to enable https in jboss eap 7?

#Answer#

xvpulbbn Waked answered


  1. Generate Key. On the command line, type $JBOSS_HOME /standalone/configuration.
  2. Add HTTPS Connector. Go to $JBOSS_HOME /standalone/configuration directory and open the standalone.
  3. Specify SSL Parameters. Go to $JBOSS_HOME /standalone/configuration directory and open the standalone.

How to enable vnc server on raspberry pi?

#Answer#

Sameep eojbuusg answered


  1. Open a terminal on your Raspberry Pi or use the PiTunnel Remote Terminal.
  2. Enter the command sudo raspi-config.
  3. Use the arrow keys to select Interfacing Options and press Enter.
  4. Use the arrow keys to select VNC and press Enter.
  5. You will be prompted to enable VNC Server.

How to enable number pad on keyboard?

#Answer#

Farheen Pratap answered


Go to Start, then select Settings > Ease of Access > Keyboard , and then move the slider under On-Screen Keyboard. A keyboard appears on the screen. Click Options and check Turn on numeric keypad and click OK.

How to enable raise hand in zoom?

#Answer#

Bajaj Innovation answered


  1. Windows: You can also use the Alt+Y keyboard shortcut to raise or lower your hand.
  2. Mac: You can also use the Option+Y keyboard shortcut to raise or lower your hand.

How to enable wmi on windows server 2012?

#Answer#

Shan Sovann answered


  1. To open the Run menu, press the Windows logo key + R.
  2. Type the following: wmimgmt.msc.
  3. Click OK.
  4. Right-click on WMI Control (Local), select Properties.
  5. Click the Security tab.
  6. From the Namespace menu tree, expand Root, click CIMV2.

How to enable telnet on technicolor tg582n?

#Answer#

Wahid lsiinf Kazisolution answered


To enable it you need to go to Control Panel > Programs > Programs & Features > Turn Windows features on or off and check the box that says Telnet Client . Windows will install the Telnet client in a few seconds.

How to enable bhop in half life 2?

#Answer#

Ritu Tanhame answered


In order to bunny hop in Half-Life and its expansions, you must strafe using the A/D keys while turning the mouse in that direction , i.e. if you strafe right, you turn your mouse right. By doing this, you will gain speed upon every successful jump. It's important not to hold forward, or it will not work.

How to enable snapping qgis?

#Answer#

Mario Nur answered


Choose the Settings > Options menu and then the Digitising Tab. Next choose to open the Snapping Toolbar and select the Enable Snapping tool (magnet). Now hover your cursor in the map to snap to a feature to start digitising.

How to enable utorrent in firewall?

#Answer#

Haroon Akhil answered


Go to Options > Preferences > Connection , check "Add BitTorrent/uTorrent to Windows Firewall." This is enabled by default. People using other firewalls: You will need to refer to your software's own documentation.

How to enable breakout rooms in teams?

#Answer#

Vicki Ontkean answered


  1. Join your meeting from the Teams desktop client.
  2. Once the meeting has started, select the breakout room icon.
  3. In the pop-up settings window, select the number of breakout rooms you want to create and how participants will be assigned:

How to enable mbstring in ubuntu?

#Answer#

Suzane Alluring answered


  1. sudo apt-get install php7.2-mbstring.
  2. sudo apt-get install libapache2-mod-php7.2.
  3. sudo service apache2 restart.

How to enable mtp on android?

#Answer#

Ike Meilen answered


  1. Navigate to 'Apps' > 'Power Tools' > 'EZ Config' > 'Generator'
  2. Open DeviceConfig.xml. Expand 'DeviceConfig' > 'Other Settings' Tap 'Set USB Mode' and set to required option. MTP - Media Transfer Protocol (File transfers) PTP - Photo Transfer Protocol. Select 'Update Configure' Save.
  3. Reboot the device.

How to enable outgoing calls in airtel?

#Answer#

Pandey Vivek answered


In [Settings] > [Dual SIM and Mobile Network] / [Dual SIM and Cellular Network] / [Dual SIM and Mobile Data] > choose SIM > [Preferred Network Type] and switch to 2G only, to check if the calling is normal.

How to enable offline editing in google docs?

#Answer#

Waqar S answered


  1. Open Google Drive.
  2. At the top right, click Settings. Settings.
  3. Turn on Offline setting.
  4. To work offline, in your Chrome browser, open Google Docs, Sheets, or Slides.

How to enable cell selection in excel?

#Answer#

Rinku Waruna answered


  1. Start Excel, open your workbook, and then select the range that you want to allow access to.
  2. In Excel 2007, click the Home tab, click Format in the Cells group, click Format Cells, and then click the Protection tab.
  3. Click to clear the Locked check box, and then click OK.

How to enable vr mode in android?

#Answer#

Sabev gpjhkwg Law answered


  1. Use the Daydream button to bring up the Dashboard and tap on the Settings icon.
  2. Go to Daydream and VR settings.

How to enable gta online?

#Answer#

Vishwesh Dennis answered


To access it, either hold down to the d-pad to bring up the character selection wheel and select the bottom segment (which represents your GTA Online character), or pause the game, pick the Online menu tab and choose the Play GTA Online option.

How to enable infinite fuel ksp?

#Answer#

Taporaj Rao answered


Press ALT+F12 to access the debug console, which you can use to enjoy unlimited fuel, unbreakable joints, and other helpful perks.

How to enable whiteboard in teams?

#Answer#

Slim Quan answered


Just click on the Whiteboard tab and automatically you will be navigated to Whiteboard app in Microsoft Teams. During the meeting, you can share the Whiteboard. Select the Share (1) button and select Microsoft Whiteboard. In the new tab, you will get the possibility to work on the whiteboard.

How to enable global search in salesforce?

#Answer#

Gurudev Lokhande answered


  1. Delete the standard Search Results component. Choose Global Search Results component from the list on the left panel.
  2. Click “Add” button in the Property Editor of the component. Choose the object you want to be included in search results.
  3. Click Save and Publish.

How to enable snmp in windows 10?

#Answer#

nxigumi Drew answered


  1. Open the Settings on your Windows machine.
  2. Click Apps.
  3. Choose Manage optional features under Apps & features.
  4. Click Add a feature.
  5. Select Simple Network Management Protocol (SNMP) from the list.
  6. Click Install to enable SNMP on your computer.

How to enable type c headphones?

#Answer#

Ajay ihdkut answered


  1. Plug your Pixel USB-C earbuds into your phone.
  2. Start setup: If you see a notification that says "Pixel USB-C earbuds connected," tap Finish setup. If you don't see a notification, press and hold Home . Then tap Finish headphones setup.
  3. Follow the steps on the screen.

How to enable speech to text in word?

#Answer#

hwhjgsc Sherif answered


In Microsoft Word, make sure you're in the "Home" tab at the top of the screen, and then click "Dictate." 2. You should hear a beep, and the dictate button will change to include a red recording light. It's now listening for your dictation.

How to enable aod on redmi note 8 pro?

#Answer#

Biren ktpjkscx Charith answered


Step 1: Go to the settings app on your Xiaomi Redmi Note 8 Pro by swiping down and clicking on the Gear settings icon on the Top right of the notification panel. Step 2: Now Search for the Always-On Display and Lock Screen option and tap on it as shown in the screenshot below.

How to enable crontab for a user in linux?

#Answer#

Ario Vidhani answered


  1. If cron.
  2. If cron.allow does not exist – all users except the users listed into cron.deny can use crontab.
  3. If neither of the file exists – only the root can use crontab.
  4. If a user is listed in both cron.

How to enable spell check in word?

#Answer#

Kratika Cowley answered


Here's how. Click File > Options > Proofing , clear the Check spelling as you type box, and click OK. To turn spell check back on, repeat the process and select the Check spelling as you type box. To check spelling manually, click Review > Spelling & Grammar.

How to enable aquos link?

#Answer#

Mariem Badgujar answered


  1. Press MENU on your Sharp remote.
  2. Select System Options.
  3. Select AQUOS Link Setup.
  4. Set AQUOS Link Control to On.

How to enable wyze on alexa?

#Answer#

Anuradha vgxkgj answered


  1. Open up the Wyze app, go into your Account settings, then tap on "Smart Integrations" to link Alexa to your Wyze account.
  2. You can also link your Wyze account by asking Alexa to “Enable Wyze skill”.
  3. Once enabled, follow the on-screen instructions to link your Wyze account to Alexa.

How to enable ztp on arista?

#Answer#

Biju Venter answered


If you wish to re-enable ZTP, go to configure mode and run zerotouch enable . The next time you erase the startup-config and reload the switch, the switch will end up ZTP mode again.

How to enable job costing option in tally?

#Answer#

ckosf Mohanty answered


  1. Go to Gateway of Tally > Accounts Info > Cost Centres > Create .
  2. Enter the Name of the cost centre.
  3. Select Primary or the required cost centre in the field Under .
  4. Set the option Use for Job Costing to Yes .
  5. Press Enter .
  6. Press Enter to save the cost centre.

How to enable microphone on iwatch?

#Answer#

Mubeen wtfkjtxj answered


Go to: Settings > Siri & Search - check that Siri settings are enabled. Go to: Settings > General > Restrictions - check that the restriction for Siri & Dictation is not enabled. Go to: Settings > General > Keyboard - check that Enable Dictation is turned on.

How to enable lg tv screen share?

#Answer#

Hill Hassan answered


Ensure that your mobile device and the TV are connected to the same Wi-Fi. From your phone, go to SETTINGS, then select SHARE AND CONNECT. Under SCREEN SHARE category, select SCREEN SHARING or MIRROR SCREEN .

How to enable ok google when phone is locked?

#Answer#

Faran Tech answered


  1. On your Android phone or tablet, say "Hey Google, open Assistant settings." Or, go to Assistant settings.
  2. Under "All settings," tap Lock screen.
  3. Turn Allow Assistant on lock screen on or off.

How to enable experimental gameplay minecraft pe?

#Answer#

Kundu Express answered


  1. Go to 'Edit'.
  2. Under “Game” settings, scroll down to "Experiments" and choose your toggle.
  3. When you get the popup asking "Activate Experimental Gameplay?", click "Activate Experiments".
  4. This will create a copy of your world that will get the same name as the original world with “Copy of” added in front of it.

How to enable vc in valorant?

#Answer#

Pritam Palan answered


Once you're on the main menu, click the gear icon on the top-right corner and select Settings on the menu that appears in the middle of your screen. Head to the Audio tab and select Voice Chat . Look for Party Voice Activation Mode, and you can opt to set it as Automatic.

How to enable ok google assistant?

#Answer#

syxpnf Anjum answered


  1. On your Android phone or tablet, go to Assistant settings, or open the Google Assistant app. and say, “Assistant settings.”
  2. Under "Popular settings," tap Voice Match.
  3. Turn on Hey Google. If you don't find Hey Google, turn on Google Assistant.

How to enable purchase order in tally erp 9?

#Answer#

Abdul Sean answered


  1. To enable Purchase Order in Tally.ERP 9, click on “F – 11”: Features (F2: Inventory Features)
  2. In the Order Processing section, set Allow Purchase Order Processing to “YES”, to create a purchase order.

How to enable nginx module?

#Answer#

Ben jisqlg Shitiz answered


  1. Download the Nginx source code.
  2. Run the Nginx configure script with --add-module parameters, like this: ./configure --prefix=/somewhere --add-module=/path-to-your-module.
  3. Run make && sudo make install to compile and install Nginx.

How to enable autofill in chrome?

#Answer#

Mawra Catalán answered


  1. Click the Chrome button in the upper-right corner of the browser.
  2. Choose Settings.
  3. Scroll all the way down and click Show Advanced Settings.
  4. Scroll further until you see Passwords and Forms.
  5. Click the Manage Autofill Settings link.

How to enable cc in hotstar?

#Answer#

Matsyendra Pai answered


For subtitles please go to Settings >General >Accessibility> Switch Close Caption to ON.

How to enable subtitles in youtube?

#Answer#

Noman Funds answered


  1. Tap the three-dot menu in the upper right corner. Tap the vertical three dots in the upper right.
  2. Tap the CC icon, or Captions, in the menu. Select Captions in the menu.
  3. Select the type of captioning you prefer. Choose your captions preferences.

How to enable git in visual studio code?

#Answer#

Lina Prabha answered


  1. Go to File > Preferences.
  2. Go to Settings.
  3. Type Git: Enabled in the search bar.
  4. Make sure that the box is ticked.

How to enable dts headphone x?

#Answer#

Chitrapu Tirru answered


You can confirm DTS Headphone:X is enabled by right-clicking on the speaker icon in the taskbar, select Spatial sound, and selecting DTS Headphone:X. How do I enable the DTS:X decoder? DTS:X is enabled by selecting “Try/Buy DTS:X” within the Sound Unbound application .

How to enable jio billing?

#Answer#

Sayyed mkybzhyq answered


  1. Sign In to MyJio app.
  2. Tap on Telecom option from top header.
  3. Tap 'Pay bill' and enter the amount and tap on 'Pay'
  4. Select the preferred payment option and make the payment.

How to enable igtv sharing?

#Answer#

Arushi Perry answered


  1. Go to the IGTV video you want to share on your Instagram story.
  2. Now, open the IGTV video that you want to share and allow it to stream.
  3. Tap on the Arrow button on the bottom of the app screen.
  4. On the share window, tap on "Add video to your story".

How to enable rpmfusion in fedora?

#Answer#

Beri tvpufjr Lloyd answered


In your web browser, open the following page: https://rpmfusion.org/ Configuration. To enable the Free repository, click the RPM Fusion free for Fedora version link on the page, where version is the Fedora release you are using. This prompts you to save or open the repo file.

How to enable ms office in windows 10?

#Answer#

Rupam Neelakandan answered


  1. Go to Start > Word 2016.
  2. Select Activate. Activate should be the only option that's shown. If you're prompted for a product key and you know you paid for Office, see Troubleshoot Office that's pre-installed on a new PC.
  3. Follow the prompts to complete the activation process.

How to enable upi autopay?

#Answer#

xspm Breuckmann answered


First login to BHIM UPI App and click on 'Auto Debit' option , and then 'Mandate'. Any UPI-enabled application would have a 'Mandate' section, through which customers can create, modify, pause as well as revoke auto-debit mandate. Next step is to manage mandate.

How to enable outgoing caller id?

#Answer#

Pushpank Kancharana answered


  1. Go to the phone menu and select settings, select Call settings and then “SIM settings”.
  2. In this screen scroll down to “Additional Settings”.
  3. There are two options in this screen “Caller ID” and “Call waiting”.

How to enable cfg in cs go?

#Answer#

Srivastav iwtgrnn Charith answered


  1. In the Steam Library, right click CS:GO.
  2. Choose Properties in the menu.
  3. Press the Set the Launch Options button.
  4. Enter the command +exec autoexec.cfg.

How to enable btc on cash app?

#Answer#

Danny Jumani answered


  1. Tap the Bitcoin tab on your Cash App home screen.
  2. Press Deposit Bitcoin.
  3. Scan, copy, or share your Cash App Bitcoin address with an external wallet.
  4. Confirm with your PIN or Touch ID.

How to enable boi net banking?

#Answer#

Natalia Satpaal answered


  1. Firstly, visit official BOI website link bankofindia.co.in and wait to load the page.
  2. Click on Internet Banking.
  3. Select Personal.
  4. A popup will open for showing the browser requirements and toll free number, Click OK.

How to enable jquery in wordpress?

#Answer#

Thete Barodekar answered


  1. Step 1: Enter Compatibility Mode.
  2. Step 2: Create a Script File.
  3. Step 3: Add Code to Your Functions. php File.
  4. Step 1: Install the Plugin and Add a New Custom Field.
  5. Step 2: Test Your New Field.

How to enable force dark mode in chrome?

#Answer#

Nnegest Hawks answered


Also, if you haven't got this feature yet, you can always try the Force Dark Mode option on Chrome. To do this enter Chrome://flags on the address bar. Type 'Dark Mode' . Enable the Force Dark Mode for Web Contents and relaunch Chrome.

How to enable gpu in colab?

#Answer#

Bridgette Jong answered


  1. Navigate to Edit→Notebook Settings.
  2. select GPU from the Hardware Accelerator drop-down.

How to enable hp laptop camera?

#Answer#

Prinita Iyengar answered


Find the HP webcam in the list of devices located in the right pane of the "Device Management" window. Right-click on the webcam and click "Update." Right-click on the webcam. If "Enable " is listed in the pop-up menu that appears, select "Enable."

How to enable pm on facebook?

#Answer#

Animesh fhoxaky answered


  1. Tap Pages.
  2. Go to your Page and tap More.
  3. Tap Edit Settings then tap General.
  4. In the Messages section, tap On or Off below Allow people to contact my Page privately by showing the Message button.

How to enable qi on samsung?

#Answer#

Johan zjaddue answered


  1. First, plug the wireless charger's power adapter into a power outlet and the USB cable into the wireless charger.
  2. When you're ready, place your phone or compatible device (like a smart watch or earbuds) on the wireless charger.

How to enable hp zbook touchpad?

#Answer#

Diggity Pramod answered


Next to the touchpad, you should see a small LED (orange or blue). This light is your touchpad's sensor. Simply double tap on the sensor to enable your touchpad. You can disable your touchpad by double tapping on the sensor again.

How to enable vmx in windows 10 lenovo?

#Answer#

Jay Aqar answered


  1. Boot systems to BIOS with the F1 key at power on.
  2. Select the Security tab in the BIOS.
  3. Enable Intel VTT or Intel VT-d if needed.
  4. Once enabled, save the changes with F10 and allow the system to reboot.

How to enable xcom 2 mods?

#Answer#

ryxl Casas answered


  1. From the pre-game Options window, select the Mod Manager tab.
  2. The name of the mod will appear on an icon in the Mod Manager. Click on the red Off button next to the name of the mod to switch it to On.
  3. The next time you launch the game, the mod will be enabled.

How to enable privacy mode bdo?

#Answer#

Pezzia Gaurang answered


Privacy Mode allows you to hide your online presence from other Adventurers. You can enter the game in Privacy Mode by selecting Privacy Mode in the character selection screen .

How to enable supplemental logging for a table in oracle?

#Answer#

Raashi Benegal answered


SELECT SUPPLEMENTAL_LOG_DATA_MIN FROM V$DATABASE ; If the query returns a value of YES or IMPLICIT, minimal supplemental logging is enabled.

How to enable switch user in windows 7?

#Answer#

Ragi Mital answered


  1. Click Start, type gpedit. msc in the Start Search or Run dialog box, and press Enter.
  2. Select Local Computer Policy > Computer Configuration > Administrative Templates > System > Logon.
  3. To disable Fast User Switching: Set "Hide entry points for Fast User Switching" to Enabled.

How to enable nla using group policy?

#Answer#

Maggie Mir answered


  1. Navigate to the following:
  2. Doubleclick on “Require user authentication for remote connections by using Network Level Authentication”
  3. Check 'Enabled'.

How to enable vr mode in youtube?

#Answer#

Hodson J answered


Open the YouTube app. Search for a VR video or go to the YouTube Virtual Reality house channel by searching for "Virtual Reality." Look for this icon to find the right channel . Select a VR video. To start playback, tap the play button.

How to enable rman block change tracking?

#Answer#

Boogaloo Murney answered


  1. alter database enable block change tracking using file /u01/oracle/product/10.2.0/db_1/oradata/mydb/blk_track.trc';
  2. alter database enable block change tracking using file /u01/oracle/product/10.2.0/db_1/oradata/mydb/blk_track.trc' REUSE;

How to enable xendesktop toolbar?

#Answer#

Chris dlwg answered


  1. Logon to StoreFront Services server.
  2. Open C:\inetpub\wwwroot\Citrix\Store\web. config with Notepad.
  3. Change showDesktopViewer="True".
  4. Save the changes.

How to enable lombok in eclipse oxygen?

#Answer#

Kalpatru Koirala answered


  1. First download the lombok jar ( add to pom , it will download . u can run from that location(from your maven repository location)
  2. run jar from you maven repo location (java -jar lombok.jar)
  3. Add jar to maven/class path.

How to enable rgb on pc?

#Answer#

Lalita Jhaveri answered


To do this, remove the rear side panel from your chassis and locate the RGB/Fan controller. On the top side of the controller there is a switch, flip it (On the TURBO this controller is in the rear near the power extension cable). RGB in the system should now respond to the remote.

How to enable iac driver?

#Answer#

cvxxhxc D answered


  1. Launch Audio MIDI Setup and select “Show MIDI Studio” from the “Window” menu.
  2. In the MIDI Studio double-click the IAC Driver Icon to open the IAC Driver Properties.
  3. Check the option Device is online to activate the driver.

How to enable odbc in tally erp 9?

#Answer#

James Seo answered


  1. Press Ctrl+A to accept.
  2. Restart the Tally to get the updated changes.
  3. Now you can see bottom of tally for ODBC enabled.

How to enable dhcp in cmd?

#Answer#

Zia Sharwanand answered


  1. Become superuser on the server system.
  2. Start dhcpconfig by typing the following command:
  3. Select Configure DHCP Service or Configure BOOTP Relay Agent, as appropriate.
  4. Press Return to accept default values for all prompts until you see the following prompt:

How to enable upnp on zte router?

#Answer#

Meade Shults answered


To configure your router using LAN UPnP applications, please log into your router (page 2) and navigate to Local Network > UPnP . Click On to activate UPnP service. Click Apply.

How to enable ego feed in skype?

#Answer#

wcznfvew Gan answered


  1. In the Skype for Business main window, on the Chat Rooms tab , choose Add a room.
  2. Give your topic feed a name.

How to enable my facebook account?

#Answer#

Gan Johan answered


You can reactivate your Facebook account at any time by logging back into Facebook or by using your Facebook account to log in somewhere else. Remember that you'll need to have access to the email or mobile number you use to log in. If you can't remember your password, you can request a new one.

How to enable vm acceleration windows 10?

#Answer#

Anndi Dein answered


  1. Open Start Menu and tap on Settings cog icon.
  2. In Settings, click on 'System' and open 'Display' tab.
  3. Under the “Multiple Displays” section, select “Graphics settings”.
  4. Turn on or off “Hardware-accelerated GPU scheduling” option.
  5. Restart the system.

Would you like to join Ask Sawal!

Why?

  1. Ask Sawal is a fast growing question and answer discussion forum.

  2. 15 lakh+ questions were answered by our Ask Sawal Members.

  3. Each day 1000s of questions asked & 1000s of questions answered.

  4. Ask any question and get answer from 2.5 Lakh+ Ask Sawal Members.

  5. Constant moderation and reporting option makes questions and answers spam free.

  6. And also, we have free blogging platform. Write an article on any topic.

  7. We have 10000+ visitors each day. So a beneficial platform for link building.

  8. We are allowing link sharing. Create backlinks to your blog site or any site.

  9. Gain extra passive income by sharing your affiliate links in articles and answers.