How to SET related published Questions

#Answer#

hxhfl Houle answered

1. Once you locate your related GPO right click and select edit.
2. Navigate to Computer Configuration/Policies/Windows Settings/Security Settings/Local Policies/Security Options/
3. Set the parameter User Account Control: Run all administrators in Admin Approval Mode to Enabled .

#Answer#

Sri xzqpgr answered

1. Open the Alarms app on your Apple Watch.
2. Tap Add Alarm.
3. Tap AM or PM, then tap the hours or minutes. This step is unnecessary when using 24-hour time.
4. Turn the Digital Crown to adjust, then tap .
5. To turn the alarm on or off, tap its switch.

#Answer#

Tannishtha Dhaiber answered

1. Download the app/go to the online store/ Vi app caller tunes section.
2. A list of caller tunes will show up, segregated by genres, latest releases, and tunes of the day.
3. Click on the play button on each caller tune to hear the playback.
4. Once you make a choice, click on 'Set' to see the prices attached to the caller tune.

#Answer#

Latif Kamdar answered

1. In Calendar, create an event.
2. Click Add guests.
3. Enter the names or email of the people you want to invite.
4. Click Save.
5. To notify guests, click Send.

#Answer#

Vairinchya Krish answered

1. Command. VTP Password.
2. Use. This command secures VTP updates by setting a secure password.
3. Syntax. Switch(vlan)#vtp password <password>
4. Example. In the below example we will set a password of 'cisco' for the VTP domain on SW1.

#Answer#

Hashtag Intel answered

1. Tap CLICK ME to verify your mobile number. A silent SMS will be sent from your mobile for verification.
2. After your mobile number is verified, the New Registration screen is displayed.
3. Create six digits numeric password for logging in to application and confirm the same.

#Answer#

Drew Aryan answered

-Fill the details on the Order Entry page and click 'Review'. - Click on 'Generate TPIN on CDSL' . -Enter you BO ID and PAN card number (you can copy the BO ID as marked above. -After you enter the OTP and complete the process, a new TPIN will be sent to your registered email address.

#Answer#

Espinola qpbs Vishal answered

1. R75.45 and higher: HostName> set expert-password.
2. R75.40 and R75.40VS: HostName> set expert-password plain.

#Answer#

csrik Ames answered

Go to the file . bashrc in your home directory and set the variable, then export it. you can use /etc/bashrc if you want to do it for all the users.

#Answer#

zwwkvjdn Fadi answered

Originally Answered: How can you set the size of a button in HTML? By adjusting its height and width in CSS separately or using inline styling. Inline CSS: <button style="height:20px;width:50px">Submit</button>

#Answer#

Poorva Thakkar answered

Click the available link, OR from your Shopify admin page, go to Settings in the bottom left corner. Go to “Payment providers”, and scroll down to “Alternative payment methods”. Select your contracted Klarna payment alternative payment method(s) and enter your Klarna API credentials.

#Answer#

Daily uglp answered

You'll find this option in the Settings app on Windows 10, too. Open the Settings app from your Start menu or Start screen, select “System,” and select “Display.” Click or tap and drag the “Adjust brightness level” slider to change the brightness level.

#Answer#

Gattlin Atwood answered

To change the FoV, launch TF2, select Options at the bottom on the screen, go on the Video tab, press Advanced, and select your Field of View .

#Answer#

Pvt dtejws WomanTimes answered

1. Open the YouTube Studio app .
2. From the bottom menu, tap Content .
3. Select the video you want to edit.
4. Tap Edit. Edit thumbnail .
5. Select your thumbnail: Select one of three auto-generated thumbnails.
6. Confirm your thumbnail selection and tap SELECT.
7. Tap SAVE.

#Answer#

Weber lakb Alan answered

You can change the number to plot different shapes, i.e. geom_point(shape = x) . If you want to change point shapes based on a grouping variable, then first set the shape with the grouping variable in geom_point and then use scale_shape_manual to choose the desired shapes (optional).

#Answer#

Horo Manoj answered

On your Android phone, open Datally. Tap Daily limit . Set the amount you can use in a day. Tap Set a daily limit.

#Answer#

Prasad vuqxby Asghar answered

1. Open Settings.
2. Click on Time & Language.
3. Click on Date & time.
4. Turn off the Set time zone automatically toggle switch (if applicable).
5. Use the "Time zone" drop-down menu and select the correct zone setting.

#Answer#

Milan imwtv answered

In Tkinter, minsize() method is used to set the minimum size of the Tkinter window. Using this method user can set window's initialized size to its minimum size, and still be able to maximize and scale the window larger.

#Answer#

Omala Gill answered

To set a primary PS5 on PS5, you have to hit X on the Settings icon located at the top of the UI . Look for Users and Accounts and hit X. Scroll down and look for Other and Console Sharing and Offline Play, then hit X again.

#Answer#

Mahmood tiodw Anshul answered

1. Open WhatsApp.
2. Tap More options > Settings > Chats > App Language.
3. Select the language you want.

#Answer#

Perreira Anas answered

Install the beam one LVL at a time. Nail the first LVL to the joists , then nail the second to the first and so on. Spread heavy-duty construction adhesive between the beams for extra strength. Note: If you're installing more than three LVLs, you'll have to nail and bolt them together.

#Answer#

Jitan Majethia answered

1. In the Wallet app, tap the Add button .
2. Tap Debit or Credit Card.
3. Tap Continue.
4. Follow the steps on the screen to add a new card.
5. Verify your information with your bank or card issuer.
6. If you have a paired Apple Watch, you have the option to also add the card to your watch.

#Answer#

Dargan Rimsha answered

You can change your active subscription by using the az account set command . This command lists all the subscriptions you can access. Your active subscription is marked as True in the IsDefault column. If you don't see a subscription you expect, add the --refresh parameter to get the most current list of subscriptions.

#Answer#

T Umar answered

1. Locate the program and auto-store button on your telephone.
2. Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook.
3. Program your incoming line preference, i.e., the line you prefer to answer when you go off hook.

#Answer#

Zaheera Jaswantlal answered

1. Sign in to the Zoom web portal.
2. In the navigation panel, click Profile.
3. Under Sign In, to the right of Sign-In Password, click Edit.
4. Enter your Old Password.
5. Enter your New Password, then enter it a second time under Confirm Password to confirm.
6. Click Save Changes.

#Answer#

Verzoletto ydthrcz Sheik answered

1. There is a file in %JMETER_HOME%\bin folder called “system.
2. - Option 3 – use JMeter __P or __property function.
3. 2.Change “file.encoding” property.
4. - Option 2 – Add “file.encoding=UTF-8” (without quotes) anywhere to “system.properties” file.
5. Start or Restart JMeter and check “file.
6. By using __P or __property functions.

#Answer#

pbyphwt Shahzad answered

1. Click Add Photos/Videos.
2. Click Pick from PC to browse to where your video backgrounds are stored (the app also provides video download resources).
3. Select each video, image, or GIF you want to use as a background.

#Answer#

Mariem Liu answered

1. Download the latest version of the package from the Wkhtmltopdf project releases page.
2. Uncompress the downloaded archive and add the wkhtmltox\bin directory to your system path.
3. Restart all running servers.

#Answer#

chgrp InSight answered

1. Log in to B2B Advanced Communications as a user with the permissions to configure an SFTP server.
2. Click Systems Management > Servers.
3. On the Servers page, click New > SFTP.
4. On the Create Server page, specify values for the applicable fields as follows:

#Answer#

Amala Balachander answered

1. Select tab "General" Enter into the filed CVSROOT the following information: <username>@<server_hostname>:<cvs_full_root_path_on_the_server>
2. Select tab "Globals" Uncheck: "Check-out read only"

#Answer#

Mimoh Godhodke answered

1. Sign in to your Google Admin console. Sign in using your administrator account (does not end in @gmail.com).
2. Click Continue to verify your domain with a TXT record.
3. Look for your verification code in the setup tool and click Copy.

#Answer#

qergvdus Lebich answered

Add a new attribute to the element, using setAttribute (String name, String value) . Call void prettyPrint(Document xml) method of the example. The method gets the xml Document and converts it into a formatted xml String, after transforming it with specific parameters, such as encoding.

#Answer#

kvfcjg Brasile answered

Right-click the clip and play it in VLC media player. As it plays, right-click on the player window and choose Video > Set as Wallpaper .

#Answer#

HR Philippe answered

Click on 'Manage beneficiary' • Select 'Add within PNB Payee' to add other pnb account. Select 'Add Other bank payee' for NEFT/RTGS/IMPS transaction. Select 'Add Other PNB Credit Card Payee' to add other PNB credit Card. Select 'View/Modify Beneficiary Details/Limits' to modify the limit of exiting payee.

#Answer#

Farha Mohanty answered

1. Open the Start Search, type in “env”, and choose “Edit the system environment variables”:
2. Click the “Environment Variables…” button.
3. Set the environment variables as needed. The New button adds an additional variable.
4. Dismiss all of the dialogs by choosing “OK”. Your changes are saved!

#Answer#

Kahil Info answered

Although the Loss from House Property is allowed to be carried forward for 8 assessment years, such loss should be set off in the subsequent assessment year if there is income under head House Property. The balance which has not been set-off shall be carried forward to the next assessment year.

#Answer#

Rj vlte Digital answered

Right-click your printer, and then depending on the software program, the button might be Properties, Options, Printer Setup, Printer, or Preferences. Click the Paper/Quality tab, and then locate the Print Quality area. If the entire page is too dark, use these settings: Select the 600 dpi option .

#Answer#

Euan Bancroft answered

To change the VNC password you must first delete the existing password file. From your home directory on Unix use the rm . vnc/passwd command to do this. Once you've accomplished that all you need to do is restart your Unix VNC session (use vncserver).

#Answer#

Rai Shubhangi answered

1. Open the command prompt: Run>cmd.exe.
2. Change the directory to point to the framework folder in the version of yii that you are using so you can access the yiic.bat file.
3. c:> cd path\to\yiic or in my setup I would type cd c:\yii\yii-1.1.7.r3135\framework resulting in: c:\yii\yii-1.1.7.r3135\framework>
4. Now.

#Answer#

Roy gguyyc Rehan answered

1. Select the Windows Icon in the start bar.
2. In the Search Bar, type "Default Programs."
3. Click "Default Programs."
4. Wait for the app to start, then select "Set your default programs."
5. Find desired Excel version in the list.

#Answer#

rndtmylr Pounikar answered

1. Step 1:- Go to Naukri.com and login with your email id and password.
2. Step 2:- Now click on Edit Profile option on top right side of the browser.
3. Step 3:- Now come to the employment section and click on edit symbol.

#Answer#

Rajasekhar Trehan answered

1. Sign in to Outlook.com and select Settings. > View all Outlook settings at the top of the page.
2. Select Mail >Compose and reply.
3. Under Email signature, type your signature and use the available formatting options to change its appearance.
4. Select Save when you're done.

#Answer#

Salem oujjsfvk Pratik answered

In order to change units in Sketchup, you'll have to open the “model info” window . To do this, hover over “window” and select “model info” from the dropdown menu. Then, select “units” from the side menu. You will see format and precision options for both length and angle units.

#Answer#

American Bisbee answered

1. Copy the music file that you want to set as your ringtone to your phone.
2. Go to Settings.
3. Depending on your phone's Android version, do one of the following:
4. Tap Ringtone.
5. Tap .
6. Tap Music, and then select the music file that you've copied to your phone.

#Answer#

pivaiwkd Mirza answered

1. With your TV on, use your U-verse TV remote and press Menu.
2. Select Help > Information > Remote Control Setup.
3. Next, select your remote control from the TV onscreen list. Refer to your specific remote for TV/device setup options.
4. Select Top Ten Brand Setup, Automatic Code, or Manual Setup.

#Answer#

Shashank Penn answered

The router's Wi-Fi name should begin with "HUAWEI" and does not require a password. Open the HUAWEI AI Life App and go to CONFIGURE > SET UP . If a notification prompt does not appear, touch the Add button in the upper right corner of the app's home screen. Follow the wizard to complete the configuration.

#Answer#

Thurman Vidnovic answered

Share new status update: Under My status, tap Share ( or ) . Please note the Share option disappears once you go to another tab. Share old status update: Tap My Status on iPhone or More by My status on Android. Next, tap More ( or ) next to the status update you want to share, then tap Share.

#Answer#

Mere xzcb Srikant answered

To adjust subtitle speed of VLC, just open the particular video, click on Tools > Track Synchronization . Now, you can adjust it using the option that says “Subtitle track synchronization”. If you click on the down button, it will be hastened. The opposite thing (up button) will let you delay the subtitle speed.

#Answer#

Tilak Ganesh answered

1. Select Schedule a meeting in a chat (below the box where you type a new message) to book a meeting with the people in the chat.
2. Go to Calendar on the left side of the app and select New meeting in the top right corner.
3. Select a range of time in the calendar. A scheduling form will pop open.

#Answer#

Janica bqcrflai answered

1. Download and open PuTTYgen from the PuTTY Download Page.
2. Click Load.
3. Locate the private SSH key that you have downloaded.
4. Enter the password for your SSH Key.
5. Click the Save private key button to create the ppk file.

#Answer#

Savad Yunus answered

1. At zero level (LRV) = pressure acting on HP leg – Pressure acting on LP leg.
2. At 100 % level (URV) = pressure acting on HP leg – Pressure acting on LP leg.
3. Range = URV – LRV = 630 – 180 mmwc = 450 mmwc.
4. Y = H1 +H2 = 500 + 200 = 700 mm.

#Answer#

Lohit Ram answered

You can switch to using Kryo by initializing your job with a SparkConf and calling conf. set("spark. serializer", "org. apache.

#Answer#

Unmol bulskwt answered

You can choose the levels of significance at the rate 0.05, and 0.01 . When p-value is less than alpha or equal 0.000, it means that significance, mainly when you choose alternative hypotheses, however, while using ANOVA analysis p-value must be greater than Alpha. You can choose the levels of significance at the rate 0.05, and 0.01 . When p-value

#Answer#

Ayush Barreto answered

1. export NLS_LANG=<language>_<territory>_AL32UTF8.
2. For example, export NLS_LANG=AMERICAN_AMERICA.AL32UTF8.
3. set NLS_LANG=<language>_<territory>_AL32UTF8.
4. For example, set NLS_LANG=AMERICAN_AMERICA.AL32UTF8.

#Answer#

Unmol Ketelsen answered

1. Open ~/. vimrc file (or create it if it didn't exist).
2. Add set hlsearch in the file.
3. Save the file.

#Answer#

Edmund Gatiss answered

For this dial 198 from your Jio Sim and tell the customer care that you are not receiving missed call alerts on your phone. They will resolve your issues and activate the Jio Missed Call Alert service on your Sim.

#Answer#

Raveendra Mukerji&gt; answered

1. Open Outlook.
2. Click on the File tab in the upper left-hand corner, then select Automatic Replies (Out of Office) on the next screen.
3. Select “Send automatic replies”
4. Enter in your desired automatic reply message.

#Answer#

Mazher Babai answered

To set LPF filters on your subwoofer amp, an easy way is to disconnect the RCA's to any amplifiers that are not powering your subs. Be sure that all equalizer settings (bass, treble, front/rear, etc) in your head unit or at “0” or flat .

#Answer#

Rajinder Messier answered

Phone: Call a Customer Service Representative at 888-345-5788 . Mobile Services: You can quickly create a QVC Account when you download the QVC App on your mobile device. Or, simply place your first order. When processing your order, we'll create your QVC Account.

#Answer#

Marilee Cuesta answered

Go to Settings and select “Biometrics and security.” Tap on “ Secure Folder ,” then “Lock type.” Choose between Pattern, PIN, Password or a biometric option like fingerprint or iris, and create that password. Go to your app drawer and tap “Secure Folder.” Tap “Add apps.”

#Answer#

Birbal Sanyal answered

1. Enable vncserver manually, to generate a default configuration file. Please skip this step if you have done it before.
2. Kill the vncserver.
3. Edit ~/.
4. Start the VNC server again with a screen resolution.
5. Connect to the VNC server.

#Answer#

Lalitamohana Luthra answered

1. Open a photo.
2. Click the "Edit" icon (sliders)
3. Click the icon most to the right: "Crop & rotate"
4. Click the icon to the left: "Aspect ratio" and select the ratio you want.
5. Select what you want in the photo.
6. Click "Done"

#Answer#

Mariana Cameron answered

1. Access the BIOS Setup Utility.
2. From the BIOS Main menu screen, select Boot.
3. From the Boot screen, select UEFI/BIOS Boot Mode, and press Enter.
4. Use the up and down arrows to select Legacy BIOS Boot Mode or UEFI Boot Mode, and then press Enter.

#Answer#

Hitesh Sajawal, answered

Configure keyboard shortcuts IntelliJ IDEA includes several predefined keymaps and lets you customize frequently used shortcuts. To view the keymap configuration, open the Settings/Preferences dialog Ctrl+Alt+S and select Keymap . IntelliJ IDEA automatically suggests a predefined keymap based on your environment.

#Answer#

Celimon Kerry answered

Log on the the NSDL website once your PRAN has been allotted. On the bottom right corner, click on Set/Reset IPin . Now enter the details like PRAN, name of the account and date of birth (DOB). Note that all details entered should be the same as mentioned in the PRAN card.

#Answer#

Ameer Lahiri answered

Please download the EZ-Link app from the Google store or App store and register your concession card. Scan QR code to download the EZ-Link app. New users will need to perform a one-time registration for a new EZ-Link account.

#Answer#

Akhil swsjwjpk answered

Subject ( sub ): getSubject() and setSubject(String) Audience ( aud ): getAudience() and setAudience(String) Expiration ( exp ): getExpiration() and setExpiration(Date) Not Before ( nbf ): getNotBefore() and setNotBefore(Date)

#Answer#

Andrea Mahapatra answered

1. Go to your device's settings.
2. Navigate and select 'More.
3. In the 'More' settings, select 'VPN.
4. In the 'VPN' settings, tap on the '+' icon to create a new VPN on your RedMi 8.
5. Type a name for your VPN profile in the 'Name' box.
6. In the 'Type' field, select 'L2TP/IPSec PSK' VPN protocol.

#Answer#

Pahlaj Nuni answered

1. Type "alarm" into the Windows search box.
2. Click the "Alarms & Clock" icon.
3. Click the plug button to add a new alarm time. You can also select an existing alarm to edit it.
4. Set an alarm time.
5. Click the save button in the lower right corner of the window.

#Answer#

Vipin Biolos answered

1. Step #1. Our combination locks are all pre-set to 0-0-0.
2. Step #2. There will likely be a little indentation on your lock where you can depress it with the end of a pen.
3. Step #3. Turn the number dials to the combination you would like to use.
4. Step #4.
5. DOES YOUR LOCK APPEAR "STUCK" OPEN AFTER FLYING?

#Answer#

Manjeet txkhw answered

1. Right-click the desktop's lower left corner, and then click "Control Panel" to launch the Control Panel.
2. Click "Programs" then click "Default Programs" to open the Default Programs window.
3. Click "Set Your Default Programs."

#Answer#

Wunmi Krumgold answered

1. Sign in to your Zoom web portal.
2. Click Meetings.
3. Click Schedule a Meeting.
4. Choose the date and time for your meeting.
5. (Optional) Select any other settings you would like to use.
6. Click Save.

#Answer#

paltk Surya answered

1. Type "PC settings" into the Start Screen.
2. Select Network.
3. Select Connections.
4. Now choose the connection you want to change.
5. Turn on "Set as a metered connection" under Data usage.

#Answer#

Ojal Doshi answered

1. Tap the Menu icon .
2. If using the Yahoo Mail app, tap Manage Accounts.
3. Tap Account info.
4. Tap Security settings.
5. Enter your security code.
6. Tap Change password.
7. Tap I would rather change my password.
8. Enter the new password and its confirmation and tap Continue.

#Answer#

Raj sjbctvd answered

Go to UAN Member e-SEWA Portal unifiedportal-mem.epfindia.gov. in/memberinterface/ Login to UAN Portal using your UAN number and the new password sent. Now, click on Account and then press “Change password”. Enter the old password and twice enter the new password. Click on “Update” button.

#Answer#

Pinoynurse Goud answered

1. STEP 1: Name Your New York LLC.
2. STEP 2: Choose a Registered Agent in New York.
3. STEP 3: File Your New York LLC Articles of Organization.
4. STEP 4: Follow New York LLC Publication Requirements.
5. STEP 5: Create a New York LLC Operating Agreement.

#Answer#

Toori qtfvq Sophia answered

1. open terminal and Go to Particular User.
2. gedit ~/. profile.
3. Add below lines export JAVA_HOME=/usr/local/java/jdk1. 8.0_251 export M2_HOME=/usr/local/maven/apache-maven-3.3. 9 PATH="$HOME/bin:$HOME/. local/bin:$PATH:$JAVA_HOME/bin:$M2_HOME/bin"
4. Save the Changes.
5. source ~/. profile.

#Answer#

Pravesh Das answered

1. Slide the switch Lock/Wake/Clock on the top of the unit to clock position.
2. Press REV or FWD to set the clock time. The time decrements or increments will follow by a faster rate when you press and hold the buttons.
3. Slide the switch Lock/Wake/Clock on the top of the unit to Lock position when finished.

#Answer#

Jaideep lysyqwcj answered

1. Go to Start | Run and type regedit.
2. Drill down to HKEY_LOCAL_MACHINE | Software | ORACLE.
3. On the right, there should be an entry "TNS_ADMIN" - double-click on it and edit, entering the desired directory path to your TNSNAMES. ora file (i.e. C:\).
4. Click "OK" to apply.

#Answer#

Mere orrwgd Samridhi answered

1. Start PuTTY.
2. In the PuTTY Configuration section, on the left panel, select Connection → SSH → X11.
3. On the right panel, click on the Enable X11 forwarding checkbox.
4. Set the X display location as :0.0.
5. Click on Session option on the left panel.
6. Enter the hostname or IP address in the Host Name textbox.

#Answer#

Gillani myvizj Jutt answered

1. Compile Hapi FHIR Packages.
2. Setup Hapi FHIR JPA Server.
3. Start Hapi FHIR JPA Server.
4. Generate Sample Data Set.
5. Upload Sample Data Set to Server.
6. Use Patient-Browser to Visualize the Sample Data.

#Answer#

Monika Builders answered

You can adjust caster with adjustable upper or lower arms . It's best to use lowers but uppers can be used if needed. You can also adjust caster with the lower control arm frame side pocket. There's about an inch worth of adjustment but you need shims to go in between the adjustment shoe and back plate of the bracket.

#Answer#

Danilo Hurd-Wood answered

1. Server type. Select the type of LDAP server you are using.
2. Security options. Data can be passed between the MSS Administrative Server and the LDAP server as clear text or encrypted.
3. Server name. Enter the LDAP server name as either a name or a full IP address.
4. Server port.
5. Username and Password.

#Answer#

Unidrim Diggity answered

1. Go to Start.
2. Click on the little gear icon in the bottom-left corner to open “Settings.”
3. A new window will open. Click on “System.”
4. Under “Brightness and Color” increase the brightness level.
5. Open the camera app and check if the frame rate has improved.

#Answer#

Turnley Goulet answered

1. Turn on your TV.
2. Press and hold Setup until the light at the top of the remote changes from red to green.
3. Enter 9-9-1. The light should flash green twice.
4. Keep pressing CH ^ until the TV turns off.
5. Once the TV turns off, press Setup to lock in the code.
6. Press the TV power button on the remote.

#Answer#

ztmxe Patil answered

1. In Calendar, on the Home tab, click New Appointment.
2. In the Subject box, type a name for your time away.
3. In Start time and End time, click the dates when your time away starts and ends.
4. Select the All day event check box.
5. Change the Show As setting to Out of Office.

#Answer#

Lili Kovack answered

Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

#Answer#

ushdjdxc Nikolakakis answered

Assuming you have Manage Jenkins > Configure Global Security > Enable Security and Jenkins Own User Database checked you would go to: Manage Jenkins > Manage Users > Create User .

#Answer#

Review plld answered

1. Send an SMS with the first 3 words of the song/film/album of your choice to 56789 (toll-free).
2. You will receive an SMS with the list of songs matching to your input along with instructions on how to set the song of your choice as your JioTune.
3. Alternatively, you can SMS “JT” to 56789 and follow the instructions.

#Answer#

Leslie Bangriwal answered

1. 1 Swipe up Home screen to launch app screen then tap on Settings.
2. 2 Tap on Lock screen.
3. 3 Tap on Continue.
4. 4 Tap on Pattern.
5. 5 Draw your unlock pattern, then tap on Continue.
6. 6 Keep your Finger on Fingerprint sensor for scanning fingerprint.
7. 7 Tap on Done.
8. 8 Back up your pattern.

#Answer#

obmc Said answered

One of the most common methods of setting a target price is achieved by first identifying a technical chart pattern . After the pattern is identified, price targets can be set by measuring the height of the pattern and then adding it to (or subtracting it from) the breakout price.

#Answer#

Manu sldtxfsh answered

1. On the Page Layout or Layout tab, click Columns.
2. In the Columns dialog box, adjust the settings under Width and spacing to choose your column width and the spacing between columns.
3. If you want columns of varying widths, deselect the checkbox next to Equal column width.

#Answer#

Salma Rameshwari answered

In the "Data Validation" section, click "Data Validation." Then, click the "Settings" tab. In the "Allow" drop-down menu, select "List." Under "Source, " type "Yes,No " or any other comma-separated list to limit what can be entered in the cells.

#Answer#

edrz Abaza answered

1. Open your Google Account. You might need to sign in.
2. Under "Security," select Signing in to Google.
3. Choose Password. You might need to sign in again.
4. Enter your new password, then select Change Password.

#Answer#

Jimmy Infotech answered

Select a cell next to the numbers you want to sum, click AutoSum on the Home tab, press Enter, and you're done. When you click AutoSum, Excel automatically enters a formula (that uses the SUM function) to sum the numbers.

#Answer#

Neerav Lakhia answered

1. Decide on a Business Name.
2. Designate a Registered Agent.
3. Get a Copy of Your State's LLC Article of Organization Form.
4. Prepare the LLC Article of Organization Form.
5. File the Articles of Organization.
6. Create an Operating Agreement.
7. Keep Your LLC Active.

#Answer#

aocepkh Odunayo answered

1. Go to the 'Settings' app on your smartphone.
2. Open System and tap on Date & Time.
3. Turn Off the "Use Network Provided Time Zone" to manually set the Date & Time.
4. Change Date & Time accordingly and open the Mi Fit app to sync with the band.

#Answer#

Chaudhari Zeenat answered

1. Run your pgadmin in default browser.
2. right click the icon in the Windows System Tray and select Configure as shown in the image.
3. use "C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --app=%URL% to run as stand alone app.

#Answer#

Saim odrh answered

1. Take the ILS frequency from charts : configure your radio navigation receiver in the FMC.
2. Take the ILS course and interception altitude of the localizer from charts : configure the course and configure your descent to this altitude.

#Answer#

Chavali rnjituv Unmol answered

1. Open the Meet app. select a meeting.
2. Before you join, on the bottom of your self view, tap Effects . To slightly blur your background, tap Slightly blur . To completely blur your background, tap Blur background . To upload your own background, tap Add .
3. When you are done, tap Done.
4. Tap Join.