qmrm Rauniyar answered
Click Security Basics , and then click Change Password under Your Login and Password Settings. In the Change Password dialog box, enter a new password in the Enter new password field, and then enter it again in the Re-enter new password field.
Weniger Advetising answered
Raghuram Balajee answered
Ambrish Chhel answered
Vipinno Dingoo answered
ndgafhr Gohar answered
Abbas pncoi Peter answered
Taking probiotics during and after a course of antibiotics can help reduce the risk of diarrhea and restore your gut microbiota to a healthy state. What's more, eating high-fiber foods, fermented foods and prebiotic foods after taking antibiotics may also help reestablish a healthy gut microbiota.
Manti Hendawi answered
Parashuraam Verma answered
With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.
Viering qdvxy Ahmad answered
Ashley bbgvjpgu Charith answered
If you try to reinstall IIS, please first uninstall IIS and WAS via Add/Remove Programs , and then delete all existing files under C:\inetpub and C:\Windows\system32\inetsrv directories. Then you can install again cleanly.
Shoukat iifik Boy answered
Tegan Kercheval answered
Hafiz Hsiao answered
Andrey yenrcj Hania answered
Kainaz Collen answered
In case, customer forgets his/her Mpin/Tpin, same may be reset using “Forgot Mpin” option available at the bottom-right corner of login screen, as given below: Step 1. Click on “Forgot Mpin?” Page 17 Step 2. An OTP will be sent to your registered number. Enter that OTP here and click Submit.
Keya oyczb Sharma answered
Riddhi Latiwala answered
Abhijat Gandhi answered
bxnnzu Builder answered
Nehal zvyvbd answered
Step 1: Turn the water off at the supply. Step 2: Depress the levers on the HydroTap three or four times until the water stops. This will empty the tanks. Step 3: Turn off power supply at the power point.
Saroj Lloyd answered
Visit www.netpnb.com • Click on Retail User & Enter User ID on login screen & click “Continue”. Click on “Forgot Password” (placed at bottom). On password reset screen (next screen), Enter User ID & Click on Submit. Enter OTP (One Time password), received on your registered Mobile Number.
Borden Duchowny answered
Arvind wmnjfxo answered
xbftbf Hosting answered
Goyal Sayyed answered
Shakti Pathare answered
Kirpal Kalelkar answered
We connect the console cable to the device that is turned off, open the terminal, turn on the power, immediately hold down the Ctrl + P keys , hold them and wait for the inscription to appear below, if the keys are pressed late, the device can start to boot normally, in this case we'll start again.
Emil B.Bhosle answered
Winton D'Orsay answered
Long press FN + Space for restoring keyboard.
Lamont Celli answered
Turn unit off, press and hold the Z in, Z out, and power key. Hold keys until map screen appears. Soft reset, Turn unit off, press and hold the pages key and the power key, release keys when map screen appears.
Selim Pratik answered
To reset the PIN: Open WhatsApp > tap Forgot PIN? > Send Email . A reset link will be sent to the email address you provided.
Schrauf Here answered
If using the DefaultTableModel , just set the row count to zero . This will delete the rows and fire the TableModelEvent to update the GUI. JTable table; … DefaultTableModel model = (DefaultTableModel) table.
Wendie Nickerson answered
Sandali Wangchuk answered
Then you want to get rid of your SRVO-062 BZAL alarm. In order to do this you have to go to MENU<SYSTEM<MASTER/CAL and then hit F3 to RES_PCA and then when prompted hit F4 for yes.
Pune Hary answered
Hsiao ramong Mortuza answered
Open the charging tab, and opposite of the charging port , there is a small button that can be reached using a paper clip. It says reset on the top of it and does just that. Fixes the problem easily.
Zubin Mohla answered
The remotes should be placed 3-6 cms apart. Press the BACK button and Number 2 button and hold them simultaneously till the LED blinks twice and is on. Now release both the buttons. Press and release TV Power button on the Tata Sky remote.
Jolly Vijay answered
Since the cycle count of MacBooks is logged inside the battery, it is impossible to reset or reduce the count. The cycle count is a one-way trip . It keeps increasing but can't go back.
Sakib Asrani answered
Turn the machine on with dry hands. If it still won't start, unplug it or turn the circuit breaker off, then back on until the breaker firmly clicks in place and plug the machine into the outlet. Push the restart button. Some machines may require you set the knob to a specific setting for the reset feature to work.
Pune lciaknut Marko answered
Ajith Olsen answered
what happens when i turn all off? Turning off the Deveoper options using the first radio button (Off) will reset most of the options. You can turn it on and change whatever you want later.
Harrison Ananth answered
Press the center button to enter the settings. 3- Third step: Scroll down through the Nokia 130 (2017) settings until you find the section "Restore factory settings " or "Restore factory set." press the center button to access.
vexccmqu Lebich answered
Locate the "reset" switch on the front of the base station. Press and hold the button to the reset position for at least 10 seconds .
oagd Seller answered
Step 1: Visit incometaxindiaefiling.gov.in website, under 'Forget password' option, click on 'Reset' tab. Step 2: The taxpayer has to enter his/her User ID (It is your PAN number), Captcha and click on 'Continue' button. Step 3: Select the 'Using Aadhaar OTP' from the drop-down options available.
Gulshan Joginder answered
If your voltas ac remote control is locked, then a lock sign appears on your voltas ac remote display. To unlock it there is a simple step, Just Press the temp+ & temp– button simultaneously on same voltas ac remote and hold it for 3 to 5 sec your voltas ac remote will be unlocked.
Shaibal Rauniyar answered
Kothari Mariem answered
Muzammil Pasha answered
To reset the module to factory settings, use a magnet and hold it on the right side of the module as shown below for about 10 seconds . The module should reset and you will be able to see it in the WI-FI settings. There are 3 stages of connection for the wifi module and app.
ReddishBlack gpbtarh answered
Step-1: Go to SU01 transaction . Step-2: It navigates to the “user maintenance: Initial Screen”. Enter the username to change the password and click on change password icon. Step-3: It displays change password dialog box prompting for password change.
wnejuk Kushwaha answered
NH Saka answered
Go to Subscriber Self Care and enter your account Email Address and Password. Enter the text in the image, and select Login. Below the User Management heading, select Change Password. Enter your Current Password, followed by your New Password.
Sen wnkytyi Ben answered
For sampling colors in your photo, the tool you want to use is the Eyedropper Tool. By clicking and holding on the eyedropper icon in your toolbar, you can switch over to the correct eyedropper .
Asin Lakhnauwi answered
Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is powered on. The device may also be reset remotely using the auxiliary Reset button located on the bottom of the PoE Adapter.
qcssan Tariq answered
Please press the reset button on the back of NAS for 3 seconds . You will hear 1 long beep. It will reset the admin password to default “admin” and set the network as DHCP. Your data will be left intact.
Fiona Kerekeš answered
Open regedit.exe on the affected session machines. Navigate to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList . Check all profile keys one by one and delete any which correspond to logged off users.
Bharath Kroager answered
Press and hold the Command-Option-P-R keys immediately after you hear the startup sound. E. Hold these keys until the computer restarts and you hear the startup sound for a second time.
Kejejian qncv Sudhir answered
otgkjr C answered
You may reset your password by clicking the "Forgot password?" button on the log in page. Then it will turn to the new page to fill in your account information. After you entered the email and the verify code then go to your email inbox, and click a link to reset your password within 72 hours.
Shatabdi Makkar answered
Locate the power switch on the Reebok treadmill. It is near the power cord on the frame of the treadmill. Press the power reset button and wait five minutes before you resume exercising on the treadmill. Locate and check the power switch to see if it has been tripped.
Hamid Kiran answered
To factory reset the router, push a paper clip, knitting needle or pen into the Reset hole on the back of the router for 10 seconds (or until the lights flash). Please note, this will change the WiFi name and password back to the default.
Ashley escqtyf answered
You can visit the ATM, and use the option banking>change pin . When it asks for the OTP, you can enter the one that has been sent to you by the bank, and set your new pin. You can generate/change your KVB ATM Debit Card pin online.
Ding Aiken answered
Zeenat Seo answered
Laksh oxilr answered
Drag the slider to turn off your iPad . Connect your iPad to your computer while holding down the Home button. Keep holding the Home button until you see the recovery mode screen. If you backed up your iPad, restore your data and settings after you remove the passcode.
Majel Lokey answered
Hamza snvtdknq Sudhir answered
Wajid lzcrr answered
Shaligram Babu answered
Girija Ponnada answered
Pitobash Vijaykar answered
Katrina Dua answered
When device is off, press (also hold) volume down key and then press (also hold) power key. After the device vibrates, release power key (keep holding volume down key) to enter recovery mode. 2. Select "wipe data/factory reset" by volume down key (or volume up key), and then press power key.
emfv Farhan answered
Kumar jkhnnln answered
Ajith Saroj answered
Fearless Jayaraman answered
Mon ksaoaaye answered
Visit any Canara Bank ATM closest to you. When at the ATM, insert the Canara Bank Debit Card you have just received. Once you have swiped your debit card, choose the language of your preference. Next, from the several options displayed on the ATM screen, choose the “Generate Green PIN /Forgot PIN” option.
Dhotre Jayden answered
eofwl Sudheer answered
Sadab Hitesh answered
szzj Qayyum answered
HOW TO reset and restore to factory settings the Datalogic Quickscan QBT2131 / QM2131 barcode scanner. Print page 28 of the pdf file (18 on the guide) and scan the Restore EU Factory Configuration barcode and place the scaner in the cradle . Wait for confirmation beeps.
Tarakesh Luthra answered
Liliput Heins answered
Press the Mode button until the clock says " clock hour " followed by the current clock hour setting. Use the Set button to advance the hours. Press Mode to move to setting the minutes, whereupon the clock says "clock minute" and the current clock minute setting. Change this with the Set button.
Rishaab Bapayya answered
Saddam Espinola answered
Lásló Kelker-Kelly answered
Builders luczykz Yash answered
Unplug the AC power cord (mains lead). If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet. Then press the power button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into the electrical outlet.
Maggie Surwade answered
You can reset your password directly through Facebook or Google . If you have a Khan Academy account and forgot your password, visit this link. Once you enter your email address and click on Reset password, a unique URL will be sent to your inbox. By accessing that URL, you will be prompted to set a new password.
Rupam Sakthi answered
Shakti Bhardwaj answered
On the login screen, tap Forgot password above Log in. Tap Username or Phone. Enter your email address, username or phone number, then tap Next.
Jason xkooiyxk answered
Padukone Parth answered
Erico Mengde answered
Please reset your device by pressing and holding the reset pin on the bottom of the Greet until the LED ring turns off . Wait for it to power back on, and retry the setup process once the LED ring is blinking green.
Swaranlata Worlikar answered
zpgvjff Singha answered
C kaso Zeenat answered
Vaishali Geetanjali answered
To Factory Reset the band go to advance setting option on the band, click on factory reset option and double tap it . On resetting a default message will be displayed on the screen.
Elhouseny tffywqj Sunny answered
Tanu vkzyum answered
Press and hold down the volume knob, back button, and NAV button for about 10 seconds . This will reset your MAZDA CONNECT™ system. If you are experiencing system issues such as a frozen display or lagging issues, performing a system reset will most likely fix these issues.
Sapna Adnan answered
In certain models, turn the knob to reset with the power button "Off." Select the desired program. Press the power button to restart the washer. In other cases, if the machine has a "Cancel" button, push it to clear the error and then push the "Pause" or "Stop" button to reset it.
Ask Sawal is a fast growing question and answer discussion forum.
15 lakh+ questions were answered by our Ask Sawal Members.
Each day 1000s of questions asked & 1000s of questions answered.
Ask any question and get answer from 2.5 Lakh+ Ask Sawal Members.
Constant moderation and reporting option makes questions and answers spam free.
And also, we have free blogging platform. Write an article on any topic.
We have 10000+ visitors each day. So a beneficial platform for link building.
We are allowing link sharing. Create backlinks to your blog site or any site.
Gain extra passive income by sharing your affiliate links in articles and answers.