What is mtq in shipping?

MTQ Cubic Metres A cubic metre is the volume of a cube of side length one metre. Looking for the definition of MTQ? Find out what is the full meaning of MTQ on Abbreviations. MSK, Metre Per Second Squared. Transport MTQ abbreviation meaning defined here.

In this piece, we’ve compiled everything you need to know about CBM so that you can measure your cargo accurately and determine your shipping costs. Read on to know:

‍

Cubic meter or CBM is a measurement of volume of a shipment. It determines how much space your cargo will take up on a ship, aircraft or truck, which in turn will decide how much it will cost to transport.

Length x Width x Height = CBM

This is the formula used to measure your cargo volume in CBM (m³).

Say, you have a carton that is 2 metres long, 2 metres wide and 2 metres high. Then, its volume is  2 x 2 x 2 = 8 m³.

And if you have 10 such identical cartons in a single consignment, you can simply multiply the CBM with the total number of cartons to arrive at the total volume –  8 x 10 = 80 m³.

If the cartons are not of the same size, calculate the CBM for each carton by using the same formula and add up the total.

In shipping, volume (CBM) is one way of calculating freight. The other is weight. Traditionally, the weight of a shipment is said to decide its transportation cost. But what if the shipment is extremely light but has a large volume (a carton of styrofoam cups or a bale of cotton wool, for example)? Such a shipment would take up more space than, say, a shipment of small steel items. But if freight is charged on the basis of its light weight, the amount would be nominal. This is where a concept called dimensional or volumetric weight and chargeable weight comes in.

Gross Weight: This is the actual weight of your cargo, including any packaging, cushioning and pallets.

Dimensional/Volumetric Weight: The volume of cargo converted into its weight equivalent (CBM to kg) is called dimensional weight or volumetric weight. Depending on the freight mode (air, sea, road) and carrier, dimensional weight can be calculated using either of these formulas:

Quantity is the number of packages that makes up a single cargo consignment.

The DIM factor, or dimensional weight factor, varies according to freight mode (sea, air, courier, truck) and carrier. Generally accepted DIM factors are:

Note: Though the DIM factors mentioned here are widely accepted, they might still vary across freight modes, service providers and regions, so check what is applicable in your case.

Chargeable weight: Once you have both your gross weight and dimensional weight, your freight service provider will charge you on the basis of whichever of the two is greater. This is called chargeable weight. If gross weight is greater than dimensional weight, you will be charged on the basis of the former. But if dimensional weight is greater, that will be the chargeable weight.

Say, you are sending a less than container load (LCL) shipment by sea. (LCL shipping is a mode of transporting moderate volumes of cargo in a shared container). Shipping lines charge freight on the basis of CBM mostly for LCL shipments, provided they weigh less than one ton (1,000 kg). If the cargo weighs over a ton, then freight is charged on the basis of weight.

Package dimensions: 4 m x 4 m x 4 m

CBM: 4 x 4 x 4 = 64 m³

DIM factor: 1:1,000

Gross weight: 200 kg (0.2 ton)

Freight rate: $50 per CBM/ton

Since volume (CBM) is greater than actual weight, freight will be charged on the basis of CBM. Hence, freight cost: 50 x 64 = $3,200

Package dimensions: 2 m x 2 m x 1 m

CBM: 2 x 2 x 1 = 4 m³

DIM factor: 1:1,000

Gross weight: 5,500 kg (5.5 ton)

Freight rate: $50 per CBM/ton

Since gross weight is greater than volume, freight will be charged on the basis of gross weight. Hence, freight cost: 50 x 5.5 = $275

Here, we have used the second formula to calculate dimensional weight – Length (cm) x Width (cm) x Height (cm) / DIM Factor – and a DIM factor of 1:6,000 to arrive at freight cost.

Freight rate: $150 per CBM/ton

Package dimensions: 150 cm X 100 cm X 100 cm

Gross weight: 200 kg (0.2 ton)

Dimensional weight: 150 x 100 x 100 / 6,000 = 250 kg (0.25 ton)

Chargeable weight is dimensional weight (250 kg), which is greater than gross weight (200 kg). Hence, freight cost: 0.25 x 150 = $37.50

Freight rate: $150 per CBM/ton

Package dimensions: 50 cm X 80 cm X 60 cm

Gross weight: 1,200 kg (1.2 ton)

Dimensional weight: 50 x 80 x 60 / 6,000 = 40 kg (0.04 ton)

Chargeable weight is gross weight (1,200 kg), which is greater than dimensional weight (40 kg). Hence, freight cost: 1.2 x 150 = $180

This calculation is based on the formula Length (cm) x Width (cm) x Height (cm) / DIM Factor for dimensional weight, using a DIM factor of 1:3,000.

Freight rate: $60 per CBM/ton

Package dimensions: 150 cm x 80 cm x 60 cm

Dimensional weight: 150 x 80 x 60 / 3,000 = 240 kg (0.24 ton)

Gross weight: 175 kg (0.175 ton)

Dimensional weight (240 kg), which is greater than gross weight (175 kg), is the chargeable weight. Hence, freight cost: 0.24 x 60 = $15

Note: Freight rates mentioned in the examples above are representational. For actual and current rates, contact your freight forwarder or get instant quotes on Cogoport.

With many of us using containers to ship our goods, it’s important to know how many CBMs can be accomodated in a standard 20-foot, 40-foot and 45-foot container:‍

Note: HC means High Cube; Payload is the maximum cargo weight a container can hold

Like containers, pallets – flat structures used to support and secure cargo – come in standard sizes. The most common ones are the 48’’ x 40’’, 42’’ x 42’’ and 48’’ x 48’’1 pallets. One of these standard pallets can accommodate 1.26 m³.

All the dimensions and calculations mentioned so far in this article have been for packages with a regular shape, such as a cube or cuboid. A carton is a package with a regular shape, for which the formula is Length x Width x Height = CBM. But what if your package has an irregular shape? How do you measure its CBM?

1. Cylindrical package: A rolled carpet or a pipe, for example.Set the package upright and measure its height and radius (which is half of its diameter). Measurements should be in metres. Now use the formula π x r ² x h = CBM, where

2. Irregularly shaped package: To measure the CBM of such a package, measure its longest length, longest width and longest height. Then use the formula Length (max) x Width (max) x Height (max) = CBM.

Since CBM is calculated in metres, here’s how you can convert your cargo measurements into metres: