Ask Sawal

Discussion Forum
Notification Icon1
Write Answer Icon
Add Question Icon

How to attach keyboard buttons?

4 Answer(s) Available
Answer # 1 #

Pull the metal bar gently from one side to unseat it from the keyboard and allow it to be removed. Attach the metal bar to the receivers on the back of the key. Seat the metal bar into the hole on one side, and then the other. Then press firmly to attach the key.

FaHad Stephens
Answer # 2 #

Over time, when a laptop or desktop computer gets used, the keys loosen up and may fall off suddenly. In other situations, the laptop or desktop computer may get physically hit, and the keyboard may get affected. In such cases, one or more of the keys gets loose, and it will be necessary to reattach it.

This article will explain reattaching keys to laptop keyboards and mechanical keyboards. You will also learn how to maintain a keyboard and improve its lifespan.

There are two primary types of keyboard keys: the laptop keyboard and the mechanical or desktop keyboard.

The below show you how to reattach the keys on each type of keyboard.

Before reattaching the keyboard keys on a laptop, you have to take note of the three parts that make up each key. We have the keycap, keypad, and key retainer. If any of these parts are damaged, you must replace them with an unbroken or new one before they are reattached.

Here is how to reattach a loose keypad on a laptop.

If you don’t hear a snap sound, you can gently remove the keycap, keypad, and retainer and reattach them. Also, the key retainer is likely damaged if it still doesn’t attach to the keyboard after reattaching the keycap.

If the key retainer is damaged, you should get a new one and fix it.

Here is how to reattach the keys on a laptop with the retainer.

The keyboard architecture of a desktop is different from a laptop; the desktop keyboard is also known as a mechanical keyboard.

The desktop keyboard has a keycap and a plunger. The keycap inserts into the plunger through a lock and fits the model.

To reattach the back to the keyboard, you must ensure that any part of the keycap or the plunger isn’t broken. Otherwise, you will need to replace it with a new key or plunger.

Here is how to reattach a key on a mechanical keyboard.

There are simple steps to follow to maintain the lifespan of your PC keyboard and prevent the keys from being damaged.

Here are some ways to maintain a keyboard.

Laptop and desktop keys often get loose after many use, and we will need to reattach them to the keyboard when they get loose. To reattach the keys to their keyboard, you should ensure that the key parts are not damaged. Otherwise, you should replace them.

Elina Galik
Answer # 3 #

Some keys are used more than others, but no key should be left behind. Many of the best keyboards come with detachable keys, and sometimes, they can come undone. That’s why, if this misfortune ever befalls you, it’s essential to be aware of how to reattach a keyboard key. But don’t sweat, because below we’ll show you how.

We also have a bunch of other helpful guides, such as our article on how to remove a MacBook’s keyboard keys. This article is important because removal is essential in performing tasks like cleaning underneath your keyboard keys.

Attaching a keyboard key is a simple but useful skill for any computer owner. Whether you are in the process of figuring out how to replace keyboard keys or you are planning on doing a deep cleaning, reattachment is a necessary step. And if you anticipate a cleaning, we have a great resource explaining how to lock your keyboard; locking your keyboard is always a good idea before you clean, so you don’t accidentally type or change any settings. But, remember to unlock your keyboard before you start typing again.

And finally, for anyone with a wired keyboard irritated by their USB cord, we have a manual explaining the process of making a wireless keyboard out of a wired one.


Examine the key for any damages. Check the small clips and metal hooks on the back of the keycap to ensure they aren’t chipped or cracked.


Look at the key retainer on top of the switch for any damages. If the cap or the key retainer is damaged, you’ll have to purchase replacements or take the computer to a repair shop.


For larger keys, like the spacebar and the shift key, you’ll likely find metal stabilizer bars on the keycap or over the retainer. Make sure that they are in place and not bent.


Find the latch on the laptop key retainer. Then position the keycap so that the metal or plastic hooks enter the latch.


Once you’ve fit the key into the latch, push the key downwards until you hear the clips click into place.


A desktop keyboard typically has raised keys. If one of the caps continues to fall off, check for damage on both the cap and the base plunger.


If there’s no damage, place the key over the base and press down firmly.


Test the key to make sure that it works properly.


Abanoub Mahlawat
Answer # 4 #

Not all laptop keyboards are equal, and certain keyboards are constructed differently from other keyboards. However, traditionally a laptop keyboard is covered in flat, plastic keycaps with those familiar letters, numbers, and symbols.

Other parts of a key can break aside from the keycap, but a keycap snapping off your keyboard is the most common laptop keyboard issue, so if you have a broken key, chances are the keycap came off.

These keycaps lock into a tiny bit of plastic known as the keycap retainer. These are usually small, plastic circles or squares which lock the keycap into place.

Fixing a broken keycap involves making sure the retainer is secured on your computer and then gently securing the keycap on top of its retainer.

The best way to take care of your laptop keyboard is not to break it in the first place, which can be easier said than done. Luckily, if you build a few good habits, the chances of you breaking something will go way down.

Firstly, routine cleaning is essential. Keycaps can come off after residue builds up underneath them and works to separate the keycap from its retainer. Giving your keyboard a regular wipe-down is a great way to keep your keyboard clean and residue-free. Check with the manufacturer to learn what is recommended (and learn what can harm the keyboard).

Second, be aware of how hard you're pressing down on your keys! Laptop keyboards often require light presses to work, so if you're used to a more full-featured keyboard, you might be whacking away at your keys more than you need to register a keypress.

Lastly, be careful of spills near your keyboard. A spill by itself won't cause a keycap to come off, but, of course, they are not all created equally. A glass of water or seltzer can be manageable if you disconnect your board and dry it carefully and thoroughly, but anything with sugar can be an immediate game over.

Even the best maintenance can sometimes still not be enough. Sometimes the keys just can't be fixed. In those cases, your options are to replace the keyboard or replace the entire laptop.

Woke Marc