How to turn off zune 30gb?

Most software issues can be resolved by following these steps:

Simply restarting your Zune player will often solve problems. To restart your Zune, ensure the hold switch is disengaged, then hold down the back button and the top button of the pad. Release the buttons when it restarts.

Sometimes bugs get fixed in Zune software updates. To get these updates on your Zune, first make sure you have the most recent version of the Zune software installed on your computer. You can check this by running the software and going to:

Next, connect your Zune to your computer via the USB cable and run the Zune software on your computer. The software will automatically look for a new version of the Zune player software. To manually check, go to:

If the Zune is having trouble playing synced songs, erasing all of the content and resyncing may help.

Caution: This will erase everything on your Zune, so be sure to back up anything that won't get resynced from the Zune software.

Connect the Zune to your computer and run the Zune software. Go to:

After you have done this, all of your songs and other content will be erased, and you can resync your media back onto your Zune.

A last step to try, restoring your Zune deletes everything, content and software, from your Zune. This allows you to revert everything to the state it left the factory in.

Caution: As with erasing content in the previous step, this action will remove everything from your Zune. Assuming your Zune still works well enough to do so, back up anything you want to save before proceeding.

Hold both the back and top buttons until the Zune starts to restart. When it does, immediately press and hold the back, left, and center buttons on the pad. This will cause the Zune to restart again, and display "Please wait," followed by "Clearing contents. Please wait." When it has finished, the Zune will display "Connect Zune to your PC." Do so, and run the latest version of the Zune software on your computer, which will automatically install the latest firmware on your Zune.

Having trouble booting up your Zune? One of these may be the reason why.

Check to make sure the hold switch is off before you get too worried. With the hold switch activated, none of the buttons will register with the Zune, and it will appear dead. If you aren't sure which way is off, switch it both ways and try turning on your Zune.

Sometimes when you don't use your Zune for a long time, the battery can drain on its own. Try plugging the Zune in to your computer or an AC adapter. If it comes on and starts charging, you're done. If not, you may need to replace your battery.

If the display is pixelated or cracked, or if you can get music to play with a blank screen, the display is bad and needs to be replaced.

If nothing happens at all when you power on and plug in your Zune, the problem is most likely the logic board. A guide to replace this is available here.

It is also possible that the button pad is bad, or its cable to the logic board is disconnected, preventing the power button from doing anything. If the Zune powers on when plugged into a computer or AC adapter, but the buttons do not work (and the hold is disengaged), it is possible that the button pad is defective or disconnected. A guide here shows how to replace/reconnect this.

If you want to turn off your Zune device, do as following: Press and hold BACK and DOWN buttons together for a few seconds and the device will turn off. This mode is called Sleep mode by Microsoft.