How to unblock flush toilet?

We tend to take a lot of things for granted, like the fact that our toilets flush as needed. No need to think about anything, everything just works the way it is supposed to. We don’t learn how to unclog a toilet because it always works.

Until it doesn’t.

Bathroom business isn’t perhaps high on the list of things we like to talk about, but the fact is we all at one time or another face the problem of a clogged toilet. Nothing to be embarrassed about. Stuff happens. And when it does, believe it or not, there’s more than one way to unclog a toilet. In fact, there are seven different ways to unclog toilets quickly. In this post we review:

First things first. A clogged toilet is a toilet that can overflow. If water is rising to the top of the bowl, you need to act fast to prevent a potentially flooded bathroom. There are two ways to stop a clogged toilet from overflowing with water:

Take the lid off the toilet and close the open flapper that is allowing water to continue to flow. Don’t worry about the water in the tank; it is as perfectly clean as your home’s drinking water or the water in the shower. Reach behind the toilet and turn the water supply off.

Once you stop the toilet overflowing, you can move on to unclogging the toilet. You may not need them, but it’s probably a good idea to have some rags handy in case some water spills out in your attempts to unclog your toilet, especially if you decide to use some of the tools recommended below.

Every household should have a plunger. Why? Because a plunger is the best way to unclog a toilet. A house without a plunger is a house that should have had one if there is a clogged toilet.

Believe it or not, there are many different types of plungers While flat plungers are fine for flat surfaces around shower or sink drains, a plunger with a flange is better designed to unclog toilets.

There is an art to effective toilet plunging. To achieve best results, follow these steps:

Put the plunger in the toilet bowl and push down gently until you achieve a good seal. The first push is to get rid of the air. If you push too forcefully, you could splash dirty water upon yourself. Now that you have a good seal, pump the plunger up and down with some force, but make sure you maintain the seal. Finally, pull the plunger up to break the air seal. The water should rush down the drain. If this has not fixed the clog, repeat these steps until the clogged has loosened.

Once you’ve unclogged your toilet, put the plunger someplace where you can easily find it again. Because there’s always next time!

If you don’t have a plunger handy, turn to the trusted non-toxic household helper: baking soda and vinegar. You might know that baking soda and vinegar are fantastic for a variety of uses, including cleaning many surfaces, acting as an excellent deodorizer and keeping drains running smoothly. Baking soda and vinegar are equally great to fix a clogged toilet without a plunger following these simple steps:

If this doesn’t work, consider buying a plunger or following the recommendations below.

Like a plunger, plumbing snakes are handy tools for any homeowner. Regular plumbing snakes can scratch or damage porcelain toilets, so make sure to use a special toilet or closet snake, also called an auger. This special plumbing snake has a rubber coating that won’t scratch surfaces and protects the toilet’s porcelain.

To properly snake a toilet:

Again, store the augur where you can get it easily, as just because you’ve unclogged a toilet once, doesn’t mean it won’t happen again.

Don’t have a plunger or snake? Out of baking soda and vinegar? Ok, here’s something you’re bound to have handy: dish soap and water.

Helpful Hint: You can also try to use shampoo and hot water from the sink if you want to try to clear the toilet without leaving the bathroom.

This is a truly unique method for fixing a clogged toilet. Caution: Consider only if you have wet/dry vacuum. Do not try this method with a regular household vacuum. You risk ruining the vacuum and, more importantly, the possibility of shocking yourself.

While chemical drain cleaners are not recommended because they can damage plumbing and create chemical burn hazards, we do recommend you try an enzyme or bio cleaner, like BioBen. This product is recognized by the Environmental Protection Agency (EPA) as safe for the environment.

BioBen claims it can continue to work in your pipes to keep flowing free of clogs for up to a month.

If none of these methods works to unclog your toilet, or if you don’t have the necessary tools to properly unclog your toilet, it’s time to call in a professional plumber. A plumber is also your best option if you have a toilet that frequently clogs—that means you’ve got a serious problem somewhere deeper in your pipes.

You can count on Benjamin Franklin Plumbing to effectively unclog your toilets and drains. We take to heart the words of our namesake, Benjamin Franklin, who famously said, “It takes many good deeds to build a good reputation, and only one bad one to lose it.” We’ve built our company around bringing a higher level of excellence to every customer experience. Benjamin Franklin Plumbing and our licensed plumbers proudly offer an on-time guarantee and a 100 percent customer satisfaction guarantee to meet all your plumbing service needs. Because we’re locally owned and operated, our plumbers are familiar with the plumbing challenges you face. If there’s any delay in providing your service, we pay!

We tend to take a lot of things for granted, like the fact that our toilets flush as needed. No need to think about anything, everything just works the way it is supposed to. We don’t learn how to unclog a toilet because it always works.

Until it doesn’t.

Bathroom business isn’t perhaps high on the list of things we like to talk about, but the fact is we all at one time or another face the problem of a clogged toilet. Nothing to be embarrassed about. Stuff happens. And when it does, believe it or not, there’s more than one way to unclog a toilet. In fact, there are seven different ways to unclog toilets quickly. In this post we review:

First things first. A clogged toilet is a toilet that can overflow. If water is rising to the top of the bowl, you need to act fast to prevent a potentially flooded bathroom. There are two ways to stop a clogged toilet from overflowing with water:

Take the lid off the toilet and close the open flapper that is allowing water to continue to flow. Don’t worry about the water in the tank; it is as perfectly clean as your home’s drinking water or the water in the shower. Reach behind the toilet and turn the water supply off.

Once you stop the toilet overflowing, you can move on to unclogging the toilet. You may not need them, but it’s probably a good idea to have some rags handy in case some water spills out in your attempts to unclog your toilet, especially if you decide to use some of the tools recommended below.

Every household should have a plunger. Why? Because a plunger is the best way to unclog a toilet. A house without a plunger is a house that should have had one if there is a clogged toilet.

Believe it or not, there are many different types of plungers While flat plungers are fine for flat surfaces around shower or sink drains, a plunger with a flange is better designed to unclog toilets.

There is an art to effective toilet plunging. To achieve best results, follow these steps:

Put the plunger in the toilet bowl and push down gently until you achieve a good seal. The first push is to get rid of the air. If you push too forcefully, you could splash dirty water upon yourself. Now that you have a good seal, pump the plunger up and down with some force, but make sure you maintain the seal. Finally, pull the plunger up to break the air seal. The water should rush down the drain. If this has not fixed the clog, repeat these steps until the clogged has loosened.

Once you’ve unclogged your toilet, put the plunger someplace where you can easily find it again. Because there’s always next time!

If you don’t have a plunger handy, turn to the trusted non-toxic household helper: baking soda and vinegar. You might know that baking soda and vinegar are fantastic for a variety of uses, including cleaning many surfaces, acting as an excellent deodorizer and keeping drains running smoothly. Baking soda and vinegar are equally great to fix a clogged toilet without a plunger following these simple steps:

If this doesn’t work, consider buying a plunger or following the recommendations below.

Like a plunger, plumbing snakes are handy tools for any homeowner. Regular plumbing snakes can scratch or damage porcelain toilets, so make sure to use a special toilet or closet snake, also called an auger. This special plumbing snake has a rubber coating that won’t scratch surfaces and protects the toilet’s porcelain.

To properly snake a toilet:

Again, store the augur where you can get it easily, as just because you’ve unclogged a toilet once, doesn’t mean it won’t happen again.

Don’t have a plunger or snake? Out of baking soda and vinegar? Ok, here’s something you’re bound to have handy: dish soap and water.

Helpful Hint: You can also try to use shampoo and hot water from the sink if you want to try to clear the toilet without leaving the bathroom.

This is a truly unique method for fixing a clogged toilet. Caution: Consider only if you have wet/dry vacuum. Do not try this method with a regular household vacuum. You risk ruining the vacuum and, more importantly, the possibility of shocking yourself.

While chemical drain cleaners are not recommended because they can damage plumbing and create chemical burn hazards, we do recommend you try an enzyme or bio cleaner, like BioBen. This product is recognized by the Environmental Protection Agency (EPA) as safe for the environment.

BioBen claims it can continue to work in your pipes to keep flowing free of clogs for up to a month.

If none of these methods works to unclog your toilet, or if you don’t have the necessary tools to properly unclog your toilet, it’s time to call in a professional plumber. A plumber is also your best option if you have a toilet that frequently clogs—that means you’ve got a serious problem somewhere deeper in your pipes.

You can count on Benjamin Franklin Plumbing to effectively unclog your toilets and drains. We take to heart the words of our namesake, Benjamin Franklin, who famously said, “It takes many good deeds to build a good reputation, and only one bad one to lose it.” We’ve built our company around bringing a higher level of excellence to every customer experience. Benjamin Franklin Plumbing and our licensed plumbers proudly offer an on-time guarantee and a 100 percent customer satisfaction guarantee to meet all your plumbing service needs. Because we’re locally owned and operated, our plumbers are familiar with the plumbing challenges you face. If there’s any delay in providing your service, we pay!

Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.

It’s never an ideal situation: A quick trip to the bathroom followed by a single flush and, boom, you’re dealing with a clogged drain or—much worse—a nearly overflowing toilet. If you find yourself without a plunger, you don’t know how to plunge a toilet,  or if you’ve tried using a plunger and it didn’t work, you have a few unclogging options before resorting to hiring a plumber. You can usually take care of a clogged toilet or toilet overflow using items you already have in your bathroom or kitchen cabinets. Read on to learn how to fix a clogged toilet (and be sure to wear protective gloves).

When you notice a nasty clog or your toilet won’t flush, your best bet is to pour in some hot water. You can turn the tap in your bathroom sink or tub to the hottest setting or heat the water up a bit on the stove, but don’t let the water get to boiling point. Pour it down the drain and let it sit for a few minutes to see if it loosens the clog. You’ll know if your efforts were successful if you see the water start to drain. Then, give the toilet a flush or two. In many cases, hot water is enough to break up whatever is causing the backup.

(Pro tip from a Bob Vila editor who recently used this technique: Cupfuls of hot water don’t help much, but larger quantities do. Fill a water pitcher, small bucket, or even your bathroom wastebasket with hot water—if the water level in your toilet isn’t already precariously high—and pour the water in while standing up. Repeat, repeat, repeat.)

RELATED: How to Use a Plunger the Right Way

If you need to kick the unclogging process up a notch, fetch some dish soap from the kitchen and squeeze a generous amount, about a 1/4 cup should do, into the toilet bowl. Let the soap sit for 5 to 10 minutes so it has time to move down the drain and reach the clog. Then, add hot water (again, not boiling water) to the bowl and let the soapy mixture sit. In most cases, the dish soap will act as a lubricant and grease the clog in the toilet drain enough to get everything moving again.

RELATED: Buyer’s Guide: Best Toilets

Who knew that something you learned in elementary school science would help with unclogging a toilet? Don’t try this hack in a toilet bowl that is already filled to the brim—you’ll want to either empty out some of the water first, or wait until the water level recedes. Here’s what to do: Pour 1 cup of baking soda and 1 cup of vinegar down the toilet drain. When the vinegar and baking soda combine, the natural chemical reaction will bubble up and loosen the clog. After about 30 minutes, follow up with some hot water and see if it drains. If it does, you’re good to go. If it doesn’t, repeat the process once more.

RELATED: 10 Ingenious Home Uses for Baking Soda

This may seem a little unpleasant, but if you’re really in a bind and there’s no toilet plunger in sight, grab a toilet brush and angle the bristles down the drain. Pumping up and down a few times should be enough to loosen things up so the clog clears in no time. (If you want a plunger handy in case your toilet clogs again, you’ll find some good options in our researched guide to the best plungers.)

RELATED: The 8 Easiest Ways to Eliminate Bathroom Odor

If you don’t have access to a drain snake, you can fashion your own using a wire coat hanger from your closet. Simply unwind the hanger so that it’s completely straight with the exception of the hook. Then, wrap a small rag around the hook to help prevent any scratches or damage to the porcelain and, while wearing rubber gloves, gently angle the hanger down the drain until you find the clog. When the water starts to drain, flush the toilet a few times to clear it out.

RELATED: 9 Clever Things You Can Do with a Wire Hanger

Don’t run out to buy a commercial drain unclogging product. Instead, create your own DIY de-clogger by mixing together the following ingredients: 2 cups baking soda, 1/4 cup Epsom salt, and 8 to 10 tablespoons of dish detergent (add 1 tablespoon at a time). Pour the combination into individual muffin liners, then let them dry and harden overnight. The next morning, drop one into the toilet bowl, add 4 cups of water, and let it sit for a few hours to see results.

RELATED: DIY Toilet Repair: 5 Common Commode Problems and How to Fix Them

Last resort: Rent a wet/dry vacuum from your local hardware store—do not try this with a regular vacuum. First, use it to empty the water from the bowl. Next, wrap the hose in an old rag to create a seal, then stick the wet/dry vacuum a few inches down the drain. When you turn on the vacuum, it should suck out the clog. Again, don’t forget the rubber gloves!

RELATED: How to Use a Shop Vac for Floods, Spills, and Other Liquid Messes

• Add one cup of baking soda to the clogged toilet.
• Wait two minutes.
• Slowly pour two cups of vinegar into the toilet.
• Allow the vinegar and baking soda mixture to work for several minutes.
• Flush the toilet to see if the clog has cleared.