What is otatri?

BT Text allows you to send and receive text (SMS) messages to and from other landlines, and mobile phones. I've received my new SIM it works fine in spare phone I have, Motorola G4, but if I put it in my phone, an LG nexus 4 (yes vintage running. WAP OTA (Over The Air) Messages are special SMS messages that contain information used to configure the settings of a WAP browser in a mobile phone. In order to use data with Virgin Mobile you will need the Internet (APN) settings on your phone. I am getting message from BT-OTATRI stating “The terminal cannot be configured remotely, please contact customer support for further assistance” why it is. 'Vishing', or telephone scams, are nothing new and involve receiving a call where someone tricks you into handing over valuable personal.

Here I am sharing The Best 3G/4G BSNL APN Settings for You Updated 2022.

APN stands for Access Point Name that helps the user to connect to the Internet, Here I will share some of the best 3G/4G BSNL APN Settings for Android and iPhone users.

In most cases when you insert any new Sim to your Mobile phone the default APN settings for that Sim get automatically updated on your Phone.

How can I get BSNL Internet settings?

Nowadays You get preinstalled BSNL Internet Settings on your phone with the Sim. To get the Internet settings you can call on 121, OR type GPRS and send it to 53733 and you will receive the settings via SMS.

But Sometimes the mobile may not function properly or someone just changed your Sim APN and you are not able to connect to the Internet or won’t get the fast Internet experience.

– > The Most Popular BSNL 397 Plan is Here

Also Check:- The Best BSNL Broadband Plans for Home

Benefits of Using Best APN Settings for BSNL:

Here is one table below that will show you the default BSNL APN Settings for 3G and 4G networks for All Android and iPhone Mobiles. If you know how to change the settings then directly use this table and copy the settings.

Those who don’t know how to change APN Settings on your Phone stay connected I will share the guide below.

Now from the table above we get to know that The Best BSNL APN Settings for Fast Internet is bsnlnet and leaving other settings as it is.

Follow the steps given below and change BSNL APN Settings for Android:

Please Note: Sometimes due to Poor Network or heavy network congestion/usage you might experience slow internet and discontinue Internet, then you may change the sim network.

Prot to Another Provider:

Just like the Android Phones Same settings are used for iPhones too. Make sure you take a backup before doing any changes if in case these settings won’t work you can reset your settings.

Follow the steps given below and change BSNL APN Settings for iPhone:

If in case you created any wrong APN settings for your BSNL 3G/4G Network and the Internet is not working now, don’t worry.

To Reset BSNL APN Settings on Android/iPhone do this:

An OTA bitmap is used for various SMS formats: Operator logo, CLI icon, Picture Message, and Downloadable Profile. In most phones the maximum size of the operator logo and the CLI icon is 72 x 14 pixels, while the maximum size of the picture message and the screen saver is 72 x 28 pixels. An OTA bitmap consists of a bitmap header and bitmap data. The size of the bitmap is specified in the header.

A typical OTA bitmap (72 x 14 pixels) header is: 00480E01

The image data is located after the header information and is encoded as follows. Each semi-octet in the OTA bitmap presents 4 pixels in the original bitmap. As one row takes 18 semi-octets, the whole 72 x 14 (operator logo and CLI icon) bitmap takes 18 x 14 = 252 semi-octets = 126 octets. Including the picture message and the screen saver, the entire 72 x 28 size bitmap takes 18 x 28 = 504 semi-octets = 252 octets. For example, if the first four pixels of the image are 1010 (1 - black, 0 - white), the first semi-octet of the OTA bitmap data is hex A.

Example:

Here is an example of a simple OTA bitmap (72 x 14 pixels). In the picture, there are two black lines and several black dots:

To send a WAP OTA message via a menu driven interface, please see the help section titled Web Menu Interface. This section describes how to send a WAP OTA message programmatically via URL parameters.

WAP OTA (Over The Air) Messages are special SMS messages that contain information used to configure the settings of a WAP browser in a mobile phone. There are two basic types of OTA messages, the most common type of OTA message contains a complete set of configuration parameters for the WAP browser, and a second type of OTA message contains a single bookmark.

The WAP Bookmark OTA message is only supported by few mobile phones (at the time this document was written). To send a WAP Bookmark OTA message, use the following URL format:

http://127.0.0.1:8800/?PhoneNumber=xxxxxxxx&WAPBookmark=name.domain/path

For 127.0.0.1, please substitute the IP address or host name assigned to your gateway PC. (Note: 127.0.0.1 is a local loop back address that can be utilized when you are connecting to the gateway from the same computer.)

For 8800, please substitute the port number that the gateway is configured to use.

Substitute the phone number that you wish to send the SMS message to for the “xxxxxxxx” in the “PhoneNumber” parameter. Use either the local phone number format, or the international phone number format (your network provider may or may not allow you to send to international phone numbers). If the international phone number format is used, note that you must substitute “%2B” for the “+” character, because of URL escaping restrictions. For example, to send an SMS to +447778001210, use %2B447778001210 instead.

The URL to be pushed to the mobile device as a bookmark is specified in the “WAPBookmark” parameter. Note that the “http://” portion of the URL is not necessary and is assumed. Also note that it may be necessary to escape some URL characters, please refer to the table in the Sending Text Messages section for common characters that must be escaped.

The gateway supports OTA documents containing “Browser settings” or “Browser bookmarks”, compatible with the Nokia/Ericsson “Over The Air Settings Specification”, with support up to v7.0.

This specification can be downloaded from the developer area of either the Nokia or SonyEricsson developer web sites.

Three approaches are provided for sending WAP Configuration OTA messages:

The “web menu” interface is defined in the help section titled Web Menu Interface. The other approaches are defined below.

WAP Configuration OTA – URL Parameters

Using the WAP Configuration OTA URL parameters requires a good understanding of the Nokia/Ericsson OTA Specification. This document specifies the mapping of gateway URL parameters to OTA setting parameters. The value provided for the gateway URL parameter is applied to the corresponding OTA setting parameter. Please refer to the Nokia/Ericsson specification for documentation of the OTA setting parameters.

OTA_BEARER – maps to TYPE=ADDRESS, PARM NAME=BEARER

OTA_PPP_AUTHTYPE – maps to TYPE=ADDRESS, PARM NAME=PPP_AUTHTYPE

OTA_PPP_AUTHNAME – maps to TYPE=ADDRESS, PARM NAME=PPP_AUTHNAME

OTA_PPP_AUTHSECRET – maps to TYPE=ADDRESS, PARM NAME=PPP_AUTHSECRET

OTA_PPP_LOGINTYPE – maps to TYPE=ADDRESS, PARM NAME=PPP_LOGINTYPE

OTA_PROXY – maps to TYPE=ADDRESS, PARM NAME=PROXY

OTA_PROXY_TYPE – maps to TYPE=ADDRESS, PARM NAME=PROXY_TYPE

OTA_PROXY_AUTHNAME – maps to TYPE=ADDRESS, PARM NAME=PROXY_AUTHNAME

OTA_PROXY_AUTHSECRET – maps to TYPE=ADDRESS, PARM NAME=PROXY_AUTHSECRET

OTA_PROXY_LOGINTYPE – maps to TYPE=ADDRESS, PARM NAME=PROXY_LOGINTYPE

OTA_PORT – maps to TYPE=ADDRESS, PARM NAME=PORT

OTA_CSD_DIALSTRING – maps to TYPE=ADDRESS, PARM NAME=CSD_DIALSTRING

OTA_CSD_CALLTYPE – maps to TYPE=ADDRESS, PARM NAME=CSD_CALLTYPE

OTA_CSD_CALLSPEED – maps to TYPE=ADDRESS, PARM NAME=CSD_CALLSPEED

OTA_ISP_NAME – maps to TYPE=ADDRESS, PARM NAME=ISP_NAME

OTA_SMS_SMSC_ADDRESS – maps to TYPE=ADDRESS, PARM NAME=SMS_SMSC_ADDRESS

OTA_USSD_SERVICE_TYPE – maps to TYPE=ADDRESS, PARM NAME=USSD_SERVICE_TYPE

OTA_GPRS_ACCESSPOINTNAME – maps to TYPE=ADDRESS, PARM NAME=GPRS_ACCESSPOINTNAME

OTA_URL – maps to TYPE=URL

OTA_MMSURL – maps to TYPE=MMSURL

OTA_NAME – maps to TYPE=NAME, PARM NAME=NAME

OTA_BOOKMARK_NAME – maps to TYPE=BOOKMARK, PARM NAME=NAME

OTA_BOOKMARK_URL – maps to TYPE=BOOKMARK, PARM NAME=URL

OTA_ID – maps to TYPE=ID, PARM NAME=NAME

Note that the “Send WAP OTA Settings” implementation in the gateway “web menu” interface uses this URL interface to submit OTA setting parameters. Viewing the source HTML for the corresponding “web menu” interface pages may provide an improved understanding of this URL interface.

WAP Configuration OTA – OTA Documents

It is also possible to provide OTA configurations by creating one or more OTA documents that contain settings compatible with the Nokia/Ericsson specification.

OTA documents should be created in the OTA subdirectory of the gateway installation, and given a file extension of “.OTA”.

Once an OTA document has been created, to send an OTA “Browser settings” file to a mobile phone, use the following URL format:

http://127.0.0.1:8800/?PhoneNumber=xxxxxxxx&OTA=filename

The “OTA” parameter specifies the name of a file located in the OTA subdirectory of the gateway with a file extension of “.OTA”. For example, in the above sample URL, the gateway would attempt to locate a file named “filename.OTA” in the OTA gateway subdirectory.

To send an OTA “Browser bookmarks” file to a mobile phone, use the following URL format:

http://127.0.0.1:8800/?PhoneNumber=xxxxxxxx&OTABookmark=filename

The “OTABookmark” parameter uses the same format as the “OTA” parameter when sending “Browser settings”, except that it expects the browser bookmark settings file to have a file extension of “.BM”.

An example OTA “Browser settings” file is shown below, for additional information, please refer to the Nokia/Ericsson “Over The Air Settings Specification”.

GSM/CSD Settings Example:

It is also possible to send OTA messages without creating an OTA document on the gateway by submitting an HTTP POST request to the gateway with the content of the POST message being an OTA “Browser Settings” file. It is not possible to submit such a request via a standard web browser, instead this request must be submitted programmatically. Submit the POST to a URL of:

http://127.0.0.1:8800/?PhoneNumber=xxxxxxxx&OTA=POST

When submitting an OTA request in this manner, the HTTP POST request must include a “Content-Length:” header.

To provide a more complete example, to perform this HTTP POST, an application can open an HTTP connection to the port for the NowSMS web interface, and send the following data:

POST /?PhoneNumber=xxxxxxxx&user=username&password=password&OTA=POST HTTP/1.0

Content-Length: yyyyyy

(*blank line*)

When sending an XML document in this manner, the HTTP POST request must include a “Content-Length:” header. This should match the length of your XML document. This is how the server detects that the HTTP POST is complete. The “&user=” and “&password=” parameters specify an “SMS Users” account that is allowed to submit messages via NowSMS.

NowSMS will scan the XML content to automatically determine what the content type is, so that it can be encoded properly for sending over the air.

BSNL is a very slow network provider so it is obvious that you might face a lot of trouble in using its internet connection. That’s why here we have brought the best BSNL GPRS settings USSD code for you. With the help of this setting, you will surely experience a faster connection while using the BSNL internet.

General Packet Radio Service or simply known as GPRS is a kind of technology that helps to transfer data through a cellular connection. This service is mainly used by teleoperators like BSNL providing 2G or 3G connections. This can help a BSNL user to send SMS, use the internet, or do video calls.

BSNL net settings code is a kind of USSD code that can help you to get your BSNL APN settings easily on your phone. However, this BSNL GPRS settings USSD code is discontinued by BSNL. So, it is suggested to use the below-mentioned methods to get your BSNL internet settings easily.

Apart from using BSNL GPRS settings USSD code, there are two other methods of getting the internet settings for BSNL. These are:

If this method doesn’t work for you then you can use the other method to get BSNL GPRS settings USSD code. For this, open your messaging app and type the following things:

space

Just send it to the other BSNL net settings SMS code 58355. Shortly, you will receive a message containing your BSNL internet settings.

To get your BSNL internet settings code, you just need to call the BSNL customer care number. Then the IVR will get started. Just select the correction options and your BSNL GPRS settings code will get delivered through SMS.

To configure the internet for BSNL, you just need to apply the steps mentioned here:

These are the simple BSNL internet settings that you need to apply to enjoy a faster internet connection on your device. Being operated by the government, BSNL yet faces lots of criticism due to its slow internet speed. There are some precautions that you can take from your side to avoid the problem of slow BSNL connection: