When to tune up motorcycle?

Knowing your motorcycle's depth is a skill that you will perfect over time to give it the best use and preventive maintenance that it requires, such as identifying these 5 signs that show you that something is wrong with your motorcycle engine.

When you accelerate suddenly or slow down with the engine brake, a well- timed bike will respond smoothly. Motorcycles must be synchronized according to altitude. The sudden change in altitude in Bogot can cause a jerk on your motorcycle in Girardot.

The signal will be improved if the synchronization is adjusted.

The dashboard of a high-cylinder motorcycle shows overheating when you squeeze the gas tank, while low-cylinder motorcycles show overheating when you squeeze the gas tank.

The signal may indicate a problem with the air filter.

You have to check the timing of the valves, which are well set up.

A lack of coolant is a sign of overheating. If necessary, this must be checked and completed frequently.

It is advisable to use Genuine Honda Synthetic Blend oil if you notice your engine is overheating.

Don't forget to use original spare parts, and if you use a non-original spark plug for your motorcycle, it could cause an unusual heating of the engine.

A properly functioning motorcycle should not emit smoke. If you see that it comes out of your motorcycle and it is black, it could be a sign that the engine is overheating and that the air filter is dirty.

If you want to preserve the environment, hurry up and take your motorcycle to an authorized Honda workshop, because the consumption of gasoline is higher when this type of smoke is present.

Knowing the usual sound of your motorcycle's engine is a great help when it comes to recognizing anomalies. If you notice a constant noise when you turn it on, it's because you need to take it for repair as soon as possible.

If it is during the journey that metallic knocking appears, it may be due to one or more of these causes.

The blowing in the engine that indicates loss of compression and exhaust air is a noise that you must learn to identify.

The tuning of a motorcycle is an extensive maintenance session where it is verified if any part or fluid needs replacement or not. It should be done by a professional or by yourself at home. If you want to tune up your motorcycle, you're in the right place. We have selected the most useful tips so that you know what to look for.

You can read them below.

The motorcycle's performance is dependent on the chain, so it must be checked while you are doing the set-up. It is important to inspect it to see if it is loose. If you feel that it has become loose, tighten it with the help of the wheel adjusting device.

You can always clean the chain with a cleaning solution if there is rust.

It is advisable to use the best motorcycle chain grease to be sure that it will have continuous and unimpeded performance for a long time once the cleaning and adjustment is done.

During tune-ups, motorcycle fluids should be checked. You must know what fluids are in your motorcycle in order to check them. The motorcycle has 4 main liquids that must be checked.

Motor oil is intended to keep engine components well oiled. It can cause long-term damage if this oil is not changed regularly.

It's recommended to change it every year.

The brake fluid should be checked next. This fluid is used to improve the performance of the clutch and brake. It's recommended to change it at least once a year. The engine temperature is always controlled after it is checked.

Check the fork oil after that. It is recommended that this be replaced every two to three years.

If the motorcycle battery runs out in the middle of nowhere, you will have a hard time getting back home or continuing on your way.

It is important to charge the battery at set-up to make sure it will be ready for the next trip. It's important to look for warning signs that the battery is failing. If you notice that the lights are dim, it's a sign that the battery is low.

The air-fuel mixture inside the cylinders of your motorcycle is ignited by spark plugs. They keep the vehicle on the road and typically last up to 20,000 miles.

The spark plugs can be inspected through a visual inspection. You need to remove the spark plugs and check for deposits. It is recommended to replace a spark plug if it appears to be bad.

Motorcycle failure is often caused by leaks and blow ups. It is important to check the tires before you leave. When the tires are new, they will have a little over 5 millimeters of tread depth.

There are grooves on the tire and small bumps that are used as wear indicators.

The indicators are raised by a millimeter. If you notice bulges on the tires, they need to be changed because there is only 1 millimeter of tread left.