Ask Sawal

Discussion Forum
Notification Icon1
Write Answer Icon
Add Question Icon

How to help a scratched cd?

4 Answer(s) Available
Answer # 1 #

CDs and DVDs are a plastic disc that is coated with a reflective layer. The data is stored on this reflective layer. Scratches on the reflective layer can cause the laser that reads the data to skip, resulting in a skipped or garbled section of audio or video. Here are some of the most common methods for repair:

This is one of the simplest and most effective methods for fixing light scratches on CDs and DVDs. Simply squeeze a small amount of toothpaste onto a soft cloth, and gently rub it into the scratch in a circular motion. Make sure to use a non-abrasive toothpaste, such as baking soda toothpaste, and rinse the disc thoroughly with water when you're done. The mild abrasive action of the toothpaste will help to remove the surface layer of the scratch and restore the disc's reflectivity.

This is another simple and effective method for fixing light scratches on CDs and DVDs. Simply cut a small piece of a ripe banana and rub it into the scratch in a circular motion. The oils from the banana will help to fill in the scratch and restore the disc's reflectivity. Make sure to rinse the disc thoroughly with water when you're done.

This method is similar to the banana method, but using petroleum jelly instead. Simply apply a small amount of petroleum jelly to a soft cloth, and gently rub it into the scratch in a circular motion. The oils from the petroleum jelly will help to fill in the scratch and restore the disc's reflectivity. Make sure to rinse the disc thoroughly with water when you're done.

[3]
Edit
Query
Report
Iraj Gastoni
Kobzar
Answer # 2 #

Start with a basic toothpaste, something natural without any fancy gels, swirls or flavors. Squeeze a small amount onto the CD starting at the middle radius and rub it in using a sweeping motion until the entire CD is covered in a light layer of toothpaste. Let it dry, then rinse it off using tepid water.

[2]
Edit
Query
Report
Binoy Navarro
GRINDER SET UP OPERATOR THREAD TOOL
Answer # 3 #

CDs and DVDs are a plastic disc that is coated with a reflective layer. The data is stored on this reflective layer. Scratches on the reflective layer can cause the laser that reads the data to skip, resulting in a skipped or garbled section of audio or video. Here are some of the most common methods for repair:

This is one of the simplest and most effective methods for fixing light scratches on CDs and DVDs. Simply squeeze a small amount of toothpaste onto a soft cloth, and gently rub it into the scratch in a circular motion. Make sure to use a non-abrasive toothpaste, such as baking soda toothpaste, and rinse the disc thoroughly with water when you're done. The mild abrasive action of the toothpaste will help to remove the surface layer of the scratch and restore the disc's reflectivity.

This is another simple and effective method for fixing light scratches on CDs and DVDs. Simply cut a small piece of a ripe banana and rub it into the scratch in a circular motion. The oils from the banana will help to fill in the scratch and restore the disc's reflectivity. Make sure to rinse the disc thoroughly with water when you're done.

This method is similar to the banana method, but using petroleum jelly instead. Simply apply a small amount of petroleum jelly to a soft cloth, and gently rub it into the scratch in a circular motion. The oils from the petroleum jelly will help to fill in the scratch and restore the disc's reflectivity. Make sure to rinse the disc thoroughly with water when you're done.

If the above methods do not work, or if the scratch is too severe, a CD repair machine may be necessary. CD repair machines are devices that use a series of gentle polishing process to remove the scratch and restore the disc's reflectivity. These machines can be a lifesaver for CDs and DVDs with deep or multiple scratches.

[0]
Edit
Query
Report
Bist xgnthup Jeneil
SUPERVISOR ARTIFICIAL BREAST FABRICATION
Answer # 4 #
  • Make sure that the disc is inserted correctly with the label side up.
  • Use a soft, dry cloth to clean the disc.
  • Reinsert the disc, and then press the PLAY button to see if the disc plays.
  • For disc players with a HOLD switch, make sure that the switch is set to the OFF position.
[0]
Edit
Query
Report
Mehak Rashid
QUILL BUNCHER AND SORTER